This brake upgrade kit is perfect for upgrading your truck's front braking performance without completely upsetting the brake balance like a big brake kit will. Depending on any other modifications you make to your truck, an added brake proportioning valve may be necessary. You'll enjoy a little extra braking bite from this kit, but most importantly you'll have greatly improved fade resistence and consistent braking performance. The extra braking surface and ventilated rotors will really show their worth during prolonged downhill braking, transporting heavy loads, hot summer days, driving windy technical roads and in long periods of stop and go traffic.
This kit is put together with 11.5" rotors, which are 1.5" larger than stock on a 2WD pickup, and approximately .5" larger than a 4WD pickup or 4Runner. The rotor mounts to the outside of the hub (unlike the stock setup which mounts behind the face of the hub) and will push your wheels out .220". The system should clear most 15" or larger diameter wheels. Stock 14" wheels will NOT fit over this brake system.
Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!