Heavy Duty BLUE Shifter Seat (Forward Shift T-Case & Top Shift w/Chain Driven T-Case)
It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often
results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position.
These shifter seats have machined groves in the sides so instead of squeezing the seat into place, the groves on each
side allows ours to rotate into it's final position. This design makes a stronger, longer lasting hardened urethane.
These new heavy duty seats will far out last the stock units and will reduce shifter slop.
Forward shifting style t/case seat, where the t/case handle mounts atop the transmission
Top shift chain drive t/case seat, where the t/case handle mounts atop the t/case itself. Found behind G58, W59, R150F
**Not for Gear Driven T-Cases with Top Style Shifter**
These heavy duty shifter seats come in three different sizes:
Part #9035011 RED Diameter is 1.600" Fits 1985-1988 W56-A and W56-B Toyota transmissions (Commonly referred to as a Top Shift style transmission).
Part #9035013 WHITE Diameter is1.655" Fits most other 1981 and newer common Toyota transmission applications with a direct top-mounted shift level, such as L-, G-, W-, and R-series transmissions including the new 6-speed RA60 transmission.
Part #9035014 Blue Diameter is 1.530 Fits the transfer case shifter on all "Forward Shift" style transfer cases, such as a G52, G54, W56-C, W56-D, W56-E, R151F, and 1988-95 R150F applications with forward shifting transfer case shift bases. It also fits top shifting chain drive transfer case shift bases.
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.