NGK 5mm Spark Plug Wire Set 20R/22R/RE/RET 1993-1995
We realize not every engine is a race engine. Don't over spend on features that you can't use. The NGK spark plug wires are perfect for the street were high RPM's are not sustained and upgraded ignition are not used.
NGK Resistor Spark Plug Wire Sets utilize a
construction method known as "variable pitch" wire winding to create
resistance to radio frequency interference. The variable pitch winding
(loose/tight/loose) provides suppression throughout a very wide range
by "scrambling" and breaking up the electrical waves radiated by the
firing of the spark plugs.
A ferrite magnetic layer consisting of a mixture
of rubber, plastic and powdered ferrite magnetic materials, offers
uniform resistance and unsurpassed conductivity. NGK wires have a lower
resistance than conventional carbon core wires (8k ohm/meter vs. 16k
ohm/meter). This comparison is important to remember when you consider
that many manufacturers recommend wires be replaced when the resistance
exceeds 20k ohm/meter. This does not leave much margin for wear when
the wire may only meet original standards at the very early stages of
its life.At the center of NGK Resistor Spark Plug Wire Sets is
a fiberglass stranded core, made from the same family of materials
used in bullet proof vests. This core greatly enhances the overall
strength of the wire, providing a super strength backbone on which the
various layers of the wire assembly are formed. The core gives
protection from damage caused by the pulling strains that wires are
often subjected to and that can destroy their performance.
High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability.
Custom designed terminal boots are always used to
provide exact fit (not universal fit like other major wire
manufacturers). Each NGK ignition wire is fitted with a positive
locking, corrosion resistant Stainless Steel terminal end for tight fit
and maximum resistance to vibration and separation.
NGK Wire Sets are numbered for easy cylinder identification and coil wires are color coded for correct and easy installation
We always recommend use of our Race Wires for any highly modified late model engine that is electronically managed, Race or street engines can also use our Pro Wires to improve ignition performance.
- Superior Firing and Fuel Savings
- Outstanding Durability
- Consistent Performance
- Excellent Noise Suppression
- 5mm Wire
- Uses The Stock Plug Wire Hold Downs
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!