Aluminum Rocker Arm
(OEM)
After many attempts, LC Engineering has found that the trusty factory Toyota aluminum rocker arms are still the best out there. Their lightweight, durable design allows for excellent performance as well as longevity. They also have a better nose design to allow for ample clearance on high lift applications. We use these on everything from stock rebuilds to full race engines. LC Engineering recommends replacing all rocker arms whenever you install a new cam, so you do not damage your new camshaft. Rocker arms are sold individually without the adjuster and adjuster nut. Must be used with an adjuster and nut see below for the part number. Buyer beware on the reground rockers in the market. Regrinding the pad on the rocker can remove the heat treated portion of the pad making for a soft rocker. Rocker arms that are reground will not have the factory geometry of a stock rocker. To regrind a rocker will take care of the face surface but will do nothing to address the rocker shaft bore, a loose rocker bore will make adjustment difficult and will never be correct.
OEM Toyota Part #: 13801-35010
Other Related Parts:
NOTE: Using a dial indicator or telescoping gauge, verify the inside diameter of your rocker arms are still within spec. Standard inside diameter: 16.00 - 16.018 mm ( 0.6299" - 0.6306" ).
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
