Rock Sliders 58" Shortbed Pickups, 4Runner & Short Bed Single Cab Tacoma
Rock sliders are a great way of protecting the rocker panels of your
Toyota Pickup, 4Runner, Tacoma, or FJ Cruiser. These Rock Sliders are designed be the strongest on the market, starting with 1
3/4" OD x .120 wall 1035 DOM. These Rock Sliders are the only rock
sliders on the market that use 1035 DOM tubing, based on testing we
believe that using DOM tubing in this application makes these rock sliders
the strongest, most affordable available today.
This heavy duty design can take a pounding from the rocks while
keeping body damage to a minimum, allowing you to slide over or between
rocks on even the hardest trails without damage. These rock
sliders are strong enough to hold the entire weight of the truck, a
high-lift jack can be used anywhere along the slider for repositioning
the rig on the trail, or simply high-lifting it up for repairs.
The mounting legs are not welded onto the slider, but are shipped loose
so that legs can be attached in different mounting positions. Mounting
legs are pre-notched on one side and can be trimmed if needed on the
opposite side. Mounting legs are 11 1/4" long, so they allow the sliders
to stick out far enough to be used as a step if desired. Six mounting
legs, three per side, are provided with the 58" and the 67" sliders, and
eight mounting legs, four per side are provided with our 78" sliders.
Trail-Gear rock sliders are sold in pairs, and are shipped raw with no
finish, lightly oiled to prevent rusting.
NOTE: Please see Part# 3032484 for the Rock Slider Mounting Kit (6 Leg).
Contact our Tech Support Line for further information at 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!