Weber 38 Carburetor Only 20R/22R Electric Choke
LC Engineering added the carb only options to be competitive in the marketplace. For over 20 years we have been selling the Weber carb kits for the Toyota's with great success. Unless you are replacing a Weber that was already installed, we recommend going with the whole carb kit. The carb only kit is just that the carburetor. In order to install the following may be required instructions, gaskets for mounting,
air cleaner, linkage parts and fuel regulator. all those parts are available separately and will not be included.
Factory fuel line from mechanical pump is roughly 1/16" smaller than WeberRegulator/Carb fuel line. Slight pressure is all that is needed to fit the smaller line.
1034036 Weber Stock Replacement Air Filter
1033027 Weber 32/36/38 Carb to 20R/22R Manifold Adapter
1032015 Weber 32/36 Base Gasket
1032039 Weber 38 Base Gasket
1032028 Weber Air Filter Base Gasket 32/36, 38
1035021 Weber 32/36/38 Carb Linkage Kit
1035043 Weber Fuel Pump Regulator
1035057 Fuel Gauge Kit Low Pressure
Other Available Kits:
1030021 Weber 32/36 Carburetor Kit 20R/22R
1030030 Weber 38 Carburetor Kit 20R/22R
1030032 Weber 32/36 Carburetor Kit With Manual Choke 20R/22R
1030034 Weber 38 Carburetor Kit With Manual Choke 20R/22R
1030018 Weber 32/36 With K&N Air Cleaner Assembly
1030003 Weber 32/36 With K&N & 20R Manifold
1030039 Weber 32/36 With K&N & 22R Manifold
1030024 Weber 32/36 With Billet Air Cleaner Assembly
1030000 Weber 32/36 With Billet & 20R Manifold
1030036 Weber 32/36 With Billet & 22R Manifold
Unleash the sheer power of your performance vehicle with the Weber 38 Carburetor. Manufactured to deliver maximum speed and horsepower, the Weber 38 is a two-barrel synchronous electric choke carburetor. Due to its impressive performance output, this carburetor is used and trusted by countless racers that require top performance from their 4 cylinder engine. This is the carb only no air filter or adapter plate. Adapter may be required to run on your manifold.
If you've got a modified ride, then the 38 deserves your attention. This carburetor guarantees incredibly fast acceleration and increased low-end torque. Jump out to an early lead and keep it with the supreme air and fuel flow of the 38. Because the 38 carb incorporates a two-barrel synchronous design, your performance engine gets the extensive air flow it needs. Both barrels simultaneously feed the cylinders, and if you've got a modified car, then you know your car can get hungry. With twice as much oxygen and fuel entering your engine at any given moment, your car gets the extra input it needs to reach its maximum output. Unlock your vehicle's full potential and get a 38 Weber today!
WARNING: This carburetor does not come with provisions to run a kick-down cable for an automatic transmission. This WILL NOT work with an automatic transmission without custom installation including transferring and possibly modifying the linkage from the stock carburetor onto this Weber or a linkage adapter.
We at LC Engineering were never happy
with the fitment of Weber's 2-piece adapter for carburetors, so after
years of continuous testing on racing and off-road applications, LCE
came up with a better design that actually improves horsepower because
of its spiral design. Engineered and made in the U.S.A.
- LCE Pro Spiral Spacer - 1" Weber Carb. Spacer kit (Part# 1033023)
- LCE Spiral Adapter - Weber to 22R Stock Manifold (Part# 1033028)
- LCE Spiral Adapter - Stock 22R Carb. to Weber Flange (Part# 1033060)
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.