Weber 38 Carburetor Kit w/K&N Filter & Billet Air Cleaner - 20R/22R
Unleash the sheer power of your performance vehicle with the Weber 38 Carburetor. Manufactured to deliver maximum speed and horsepower, the Weber 38 is a two-barrel synchronous electric choke carburetor. Due to its impressive performance output, this carburetor is used and trusted by countless racers that require top performance from their 4 cylinder engine.
If you've got a modified ride, then the 38 deserves your attention. This carburetor guarantees incredibly fast acceleration and increased low-end torque. Jump out to an early lead and keep it with the supreme air and fuel flow of the 38. Because the 38 carb incorporates a two-barrel synchronous design, your performance engine gets the extensive air flow it needs. Both barrels simultaneously feed the cylinders, and if you've got a modified car, then you know your car can get hungry. With twice as much oxygen and fuel entering your engine at any given moment, your car gets the extra input it needs to reach its maximum output. Unlock your vehicle's full potential and get a 38 Weber today!
WARNING: This carburetor does not come with provisions to run a kick-down cable for an automatic transmission. This WILL NOT work with an automatic transmission without custom installation including transferring and possibly modifying the linkage from the stock carburetor onto this Weber or a linkage adapter.
Weber 38 Carbs Include The Following Jets:
- Main Jet 145
- Secondary Jet 145
- Primary Idle 45
- Secondary Idle 45
- Air Correction (Primary) 185
- Air Correction (Secondary) 185
- Pump Jet 70
Requires 2.5 - 3 lbs of fuel pressure, see regulator kit part# 1035056
Factory fuel line from mechanical pump is roughly 1/16" smaller than Weber Regulator/Carb fuel line. Slight pressure is all that is needed to fit the smaller line.
- eber 38 Carburetor Kit (Part# 1030030)
- Billet Air Cleaner Assembly (Part# 1034033)
We at LC Engineering were never happy
with the fitment of Weber's 2-piece adapter for carburetors, so after
years of continuous testing on racing and off-road applications, LCE
came up with a better design that actually improves horsepower because
of its spiral design. Engineered and made in the U.S.A.
- LCE Pro Spiral Spacer - 1" Weber Carb. Spacer kit (Part# 1033023)
- LCE Spiral Adapter - Weber to 22R Stock Manifold (Part# 1033028)
- LCE Spiral Adapter - Stock 22R Carb. to Weber Flange (Part# 1033060)
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.