LCE

Crush Washer This Crush Washer is a stock replacement for the worn out ones on the Cold Start Injector on Toyota engines. Sold as each. You will need (2) for each cold start injector. NOTE: Sold...

Custom Brake Line (Upgrading to 1" Bore Master Cylinder) Because we know how much everybody hates making custom brake lines, this line comes ready to plug and play. It will bolt right onto your...

Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our...

EFI Intake Bolt (Long) M8-1.25 x 95mm Socket Head Cap Screw for use on EFI intake. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...

Exhaust Manifold Stud and Nut When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the...