-
Nitrous Bottle Blanket (7" Diameter) Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of rugged, easily cleaned Nylon outer shell with insulation. It's...$70.27 -
Standard Steel Bottle Bracket (You Choose Size) NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating, or Nylon...$67.19 -
Connecting Rod Bolt Set (H-Beam Rod) To eliminate the chance of rod failure when building your motor we highly recommend replacing your rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro...$64.22 -
2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...$62.10 -
2.5" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...$61.79 -
Dual Row Timing Chain Only These heavy-duty chains are the strongest on the market. They are OEM quality at a fraction of the price. Beware of imitations. This is a 98 link chain. Contact our Tech Support Line for further information at...$61.78 -
Toggle Activation Switch (Covered) This covered toggle switch enables performance enthusiasts to activate solenoids, fuel pumps, etc. This switch keeps you from accidentally blasting Nitrous into the engine before you are ready. Contact our Tech...$59.95 -
Oil Drain Line (Stainless Steel Braided) Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...$59.52 -
Pro Connecting Rod Bolt To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...$54.09 -
2" Turbo J-Bend / Intercooler (Mild Steel) LC Engineering has all the intercooler pieces to finish off that turbo project. LC Engineering can build a custom intercooler no matter what your needs are. Contact our Tech Support Line for further...$51.45 -
Oil Pump Drive Spline (Dual Row) If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right. OEM Toyota Part #:...$43.61 -
Safety Auto Main Bearing Set Offset/Offset locating tabs When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification and ready...$43.21
-
fast shipping
Speed Delivery