-
Weld On Flat Tab Standard (You Choose Size) TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. NOTE: Shipped raw and...$28.23 -
Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal. Premature wear of the throw-out bearing can occur when there...$27.04 -
Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal. Premature wear of the throw-out bearing can occur when there...$27.03 -
Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...$26.99 -
Timing Cover Hardware (Dual Chain Applications) Timing Chain Bolt Kits for the early dual-row cover or the LC Engineering dual row conversion kit. All Hardware is zinc plated, or black oxide coated. This is the hardware used in the Timing Chain...$26.73 -
OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...$26.66 -
Clutch Slave Cylinder The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...$25.90 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$25.70 -
Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...$25.70 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing. Includes OEM rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$24.82
-
fast shipping
Speed Delivery