Odds and Ends

OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...

1 3/4" Radiator Cap (Small) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the small one that...

Radiator Inlet Hose Clamp Ensure your cooling system restoration is complete with the LC Engineering OEM Radiator Inlet Hose Clamp. At LC Engineering, we believe that no part is too small to overlook when it comes to the reliability of your engine. This...

OEM Radiator Fan Shroud Clip (1979-1998 4Runner/Pickup/Celica/Tacoma/T100) OEM Radiator Fan Shroud Clip. OEM Toyota Part #: 90468-06013 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Hose Clamp for Radiator (Outlet #1 & #2) LC Engineering is now offering an OEM hose clamp for your radiator (specifically outlet #1 &#2). Don't see what you need? Call our sales team, they might be able to track it down for you. OEM Toyota Part...

High-Pressure Radiator Cap  The LC Engineering Large Radiator Cap is a critical component for maintaining the correct pressure in your Toyota’s cooling system. Measuring 2-1/4" (57mm) in diameter, this cap is designed to fit a wide range of...

Hose Clamp (Water Bypass Hose) Need to connect the water bypass hose and secure it properly? Simply get these clamps into place, pull the retainer clip, and you are all set! Nothing makes a job easier than having the proper tools. Look no further, LC...

OEM Coolant Bypass Hose Clamp If you have ever had to connect the lines on the bottom of your throttle body, you know the foresight needed to get everything lined up properly to fit your long nose pliers in for the final step. Well, we here at LC have...