Fuel is where money gets spent chasing a fault that is somewhere else. A running-lean or hesitation complaint should start with a pressure reading, not with a parts order.
Work in this order:
The OEM fuel pressure regulator covers 1996-2004 4Runner, Tacoma, T100 and Tundra. A genuine part, and the right answer when a diaphragm has failed — the classic sign being fuel in the vacuum line.
The AEM high-flow in-tank pump is a direct in-tank replacement with more capacity than the factory unit.
The honest guidance: a stock 3.4 does not need this. The factory pump is adequate for the factory engine and a mild one. Where it earns its place is forced induction or a built engine, where the extra fuel demand is real and a marginal pump shows up as a lean condition at exactly the worst moment.
The fuel filter covers 1988-2004 Pickup, 4Runner, T100 and Tacoma.
If you do not know when it was last changed, it is due. It is the cheapest part in the fuel system and a clogged one mimics a failing pump closely enough to get a pump sold to somebody who did not need it.
A set of six injectors is a serious bill, and on a twenty-odd year old engine it is often not what the engine needs. Our fuel injector service is ultrasonic cleaning and flow testing using your own cores: each injector is cleaned inside and out, then measured for flow and spray pattern so the set can be matched.
This is the right first move on a rough idle or an uneven cylinder, because it also tells you something a new set never will — whether the injectors were the problem at all. A flow report that comes back even means you can stop looking at fuel and start looking at ignition.
You post the injectors to us. Send your name, return address, phone number and the sales order number in the box — a copy of the invoice is ideal. Postage to us is yours.
The Pro Fuel 5VZ hall sensor mount is part of an LC Pro Fuel installation — the bracketry that locates the crank trigger for a standalone system.
The Type E and Type F injector connector repairs the harness side, which is usually the real problem when one cylinder will not fire cleanly and the injector tests fine on the bench.
Fitting larger aftermarket injectors? The Denso to Bosch EV1 harness adapter plugs in between the factory plug and the new injector, so a Bosch or Lucas square-body injector goes in with no cutting and no splicing. It covers the 5VZ-FE along with 22RE Type E and F, 2RZ-FE, 3RZ-FE and the 2000-2004 2UZ-FE. It is not compatible with the 1GR-FE.
Cutting a factory injector harness is a decision that is hard to undo and it hurts the truck's value. An adapter costs very little by comparison.
Diagnosing a fuel problem and not sure what the numbers mean? Send us the pressure readings and the symptoms and we will work it through with you.
