Off-road, overland, and engine performance parts for the Toyota FJ Cruiser — 1GR-FE 4.0L V6. Suspension, body armor, drivetrain protection, supercharger kits, headers, exhaust, and OEM-spec components for the heritage-inspired SUV at the center of one of the most active off-road and overland communities in the Toyota world.
K&N Air Filter Cleaner
(99-0606)
K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. The 99-0606 Air Filter Cleaner will bring your K&N oiled cotton air...
K&N Air Filter Oil
(99-0533)
K&N 99-0533 is an 8 ounce squeeze bottle of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N...
Weld-On Oxygen Sensor Flange
(2-Bolt Flange Style)
This flange is made from 3/8" mild steel, then tapped for M8 x 1.25 studs weld on. For the 2 bolt style O2 sensor. NOT for thread-in O2 sensors...
22RE TPS Allen Bolt Upgrade Kit
One challenge to adjusting the 22re TPS is that the screws are nearly impossible to access when the unit is in the vehicle. To make the adjustment easier LC...
Plug Wire Separator Kit Pro Wires (8.5mm) - Black
These composite separators are held together with allen head screws which are mounted flush within the loom. These separators are designed...
Glowshift Single Swivel Gauge Pod
GlowShift's Universal Single Swivel Dashboard Pod is a single gauge pod designed to mount on your vehicle's dashboard and will house (1) 2 1/16" (52mm) gauge while...
Plug Wire Separator Kit
(8.5mm Pro Wires)
These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to...
Rubber Tailpipe Hanger
(2-Hole)
Factory replacement rubber insulator for tailpipe.
Contact our Tech Support Line for further information at 928-575-2174.
Note
Lucas Oil Assembly Lube
(8oz. Bottle)
Lucas Assembly Lube is designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to...
Ultra Grey Silicone Sealant
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds...
LC Engineering Limited Edition T-Shirt | Medium
Commemorate the next chapter of LCE with our Limited Edition New Logo T-Shirt. This exclusive release celebrates our refreshed branding with a classic,...
LC Engineering Limited Edition T-Shirt | XL
Commemorate the next chapter of LCE with our Limited Edition New Logo T-Shirt. This exclusive release celebrates our refreshed branding with a classic,...
The Toyota FJ Cruiser (2007–2014) is one of Toyota's most distinctive modern SUVs — a single-generation, heritage-inspired off-road vehicle that pulled its styling from the FJ40 Land Cruiser of the 1960s and 70s while sharing its underlying platform with the 4th gen 4Runner. It was sold in the U.S. for eight model years and discontinued after 2014, but the FJ Cruiser community has only grown in the decade since. These trucks are some of the most-built off-road and overland platforms in the Toyota world today — and as the supply of used FJ Cruisers tightens, parts demand and build investment per vehicle keep climbing.
The off-road and overland build profile is what defines the FJ Cruiser aftermarket. Lift kits, leveling kits, and long-travel suspension to handle technical trails and overland loads. Bumpers, sliders, skid plates, and drivetrain protection to take the trail damage that comes with hard use. Lighting and recovery setups for the build profile this community actually runs. LC Engineering supports these builds with selective product today and is actively expanding our off-road and overland catalog — this platform is one of the focal points for that direction.
On the engine side, every FJ Cruiser ran the 1GR-FE 4.0-liter V6 — Toyota's volume V6 of the era, shared with the 4th and 5th gen 4Runner, the 2nd gen Tacoma, and the 2nd gen Tundra. That cross-platform sharing means LCE's 1GR-FE engine performance catalog applies directly to the FJ Cruiser. Supercharger kits, header kits, exhaust components, throttle bodies, intake systems, and the OEM-spec engine maintenance components are all available off the shelf for builders who want the engine side of the build buttoned up alongside the off-road components.
If you are building an FJ Cruiser — full overland rig, technical trail build, or a daily driver with off-road duty — our technical team can scope what fits your specific direction. Tech line: (928) 505-2501. Email: support@lcengineering.com.
Browse FJ Cruiser parts above by system, or jump to related content: