LCE Kit

Fuel Pressure Gauge Kit 22RE 3VZ (EFI)

SKU: 2019128
0
(51 reviews) Write a Review
$74.93
Adding to cart… The item has been added

Fuel Pressure Gauge Kit

(EFI)

Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel gauge kit is the solution to this problem. This kit will replace the banjo bolt on the cold start injector with a new stainless steel bolt that accepts a 1/8 NPT gauge. Included in this kit are the copper crush washers, elbow to face gauge forward, and 0-60 PSI Gauge that is 1.5".

NOTE: This gauge is intended to be used like a tool. Premature failure may result from leaving the gauge installed under hood. Not for use in the cabin of the vehicle. For the bolt only (with no gauge or elbow), see Part #: 1093076.



Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.

  • 1983-1995 22RE 2.4L Engines
  • 1988-1995 3VZ 3.0L Engines

To open a printable PDF version of this instruction CLICK HERE




Kit Contents

  • (1) - LCE Low Pressure Fuel Gauge
  • (1) - 90 Degree Elbow Fitting
  • (1) - LC Fuel Pressure Bolt
  • (2) - Copper Washers
  • (1) - Hex Socket Pipe Plug

When installing any gauge or fitting into the fuel rail bolt, the bolt will need to be secured by a wrench when installing any components, Otherwise damage may occur on the fuel rail bolt if it is not properly supported when additional parts are installed. Fuel Pressure bolt should be torqued to no more than 22ft lbs. Check and inspect for any leaks.


NOTE:
This gauge is not intended to be left installed under hood. After every tune / use, remove gauge and install plug (supplied). Failure to remove gauge will result in gauge failure.

51 Reviews Hide Reviews Show Reviews

  • 0
    5
    Fuel Pressure Gauge kit for 22RE

    Posted by Randall Ring on May 22nd 2017

    The kit works fine and easy to install. The fuel pressure passed all tests as described on the LCE site. Note: The test description for the EFI 22RE pressure test procedure should be edited to add and state, with engine off, that you will need to jumper the fuel injector test connector and turn ignition switch to on in order to start the fuel pump. Also, the statement to "Disconnect the vacuum hose from the fuel pressure regulator and plug it, you should see 38 – 44 psi"... should be edited to state: ..and plug *the hose*.

  • 0
    5
    Easy as 1,2,3

    Posted by Carlos Diaz on Apr 18th 2017

    Easy to order product and checkout was great especially when you can use PayPal. Product arrive very fast it seem that I was just reading an email saying was shipped and whala it was at my door step.

  • 0
    5
    Excellent

    Posted by Chaviator on Feb 20th 2017

    When I saw this gauge, I said I have to get it. Great piece to monitor the fuel pressure on the engine compartment. I'm planning to have another gauge but in the cabin. Well again, a little pricey, but I'm assuming with the reputation and quality parts from LCE, it will last for a while.

  • 0
    5
    Fuel pressure kit

    Posted by Markus Draper on Nov 14th 2016

    The easiest and cheapest way to monitor your fuel pressure. Install was super easy only a 14mm wrench and a 12mm wrench are all you need. Comes with everything you need.

  • 0
    4
    Fuel Pressure Gauge 22RE

    Posted by Bob Moore on Sep 6th 2016

    Quick delivery to Australia ++++ Very easy and quick to install - just as shown in the instructions. Gauge showed good fuel pressure when needed, including start. Consequently enabled me to rule that out as potential cause of cold start problem. Although shipping to Australia doubled the cost of the gauge, it has been a very good investment. I'll be pleased to do more business with LCE Performance.

  • 0
    5
    convenient

    Posted by Unknown on Aug 29th 2016

    works well

  • 0
    5
    Excellent Deal

    Posted by Cesar L. Marruffo on Jul 11th 2016

    Ordered on Monday 4th of July and received my fuel gauge by Thursday. I even got a 4th of July discount. Can't beat it. Thanks alot..

  • 0
    5
    fuel gauge kit

    Posted by kawika kahalepuna on May 18th 2016

    shipping was fast and on time part looks and feels great works like it should

  • 0
    5
    Fuel pressure guage kit

    Posted by Chad Case on Mar 11th 2016

    Quick easy install, easy to read gauge.