K&N Valve Cover Breather
(Front of Valve Cover w/ Adapter)
K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1370 crankcase vent filter has a K&N embossed chrome-plated steel top with a black rubber base. The 1 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. This K&N Rubber Base Crankcase Vent Filter and adapter is designed to clamp directly to metal nipple on the front of the valve cover. When using dual carburetors or performance type single carburetors, this Crank Case Breather (with chrome top), should be installed in place of the vent tube located at the front of the valve cover just behind the oil filler cap. We also offer a breather that will fit in the factory PCV grommet for race applications.
Features:
- 1 inch zinc tube
- Chrome-plated steel top and rubber base
- Mounts directly into rubber grommets in valve covers
- Washable and reusable filter media
Specifications:
- Flange Inside Diameter: 1 in (25 mm)
- Height: 1.5 in (38 mm)
- Outside Diameter: 2 in (51 mm)
- Filter Material: Non-woven Synthetic
- Top Material: Chrome
- Top Style: Metal
- Product Style: Rubber Base Crankcase Vent Filters
- Flange Length: 0.625 in (16 mm)
- Flange Type: Centered
- Flanges: 1
- Weight: 0.2 lb (0.1 kg)
- Product Box Height: 2.2 in (56 mm)
- Product Box Length: 6.1 in (155 mm)
- Product Box Width: 4.1 in (104 mm)
- Inner Wire: No
NOTE: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle. The New K&N Filters will not come with oil like the good old days.
This product should not be used in a manner that violates Federal EPA Laws.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1975-1980 20R 2.2L Engines
- 1981-1995 22R 2.4L Engines
- 1983-1995 22RE 2.4L Engines
- 1985-1987 22RET 2.4L Engines
100 Reviews Hide Reviews Show Reviews
-
I like it
Sure looks good and fit perfectly. Great quality
-
it works.
This is a simple adapter and filter, it's easy to install, and does its job.
-
Crankcase Breather
Ordered the breather on Thursday evening and it was here Monday morning. First item I've purchased from LCE, won't be the last. J.C.
-
K&n
Turned out nice
-
Thank you
Thanks for the wealth of knowldge and friendly service ! Your advice and support for my 84 yota has been incredabile. Number 1 in my world of mudding! Thanks EH' !
-
Easy install
Gonna try this method for a while then try the hose back to the EFI later. Don't know which is better. Previously had just a cap.
-
breather filter
Fit and finish of this item is top notch Helped clean up my valve cover
-
K&N Breather With Adapter
Excellent kit, high quality machine work, no burrs on the part at all. Dresses up my old 20R quite nicely!
-
k&N
excellant fit good good