Thrust Bearing Set
(Standard)
When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification and ready for the miles to come. We...
Underdrive Belt
(Pro 7" Kit)
This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley without alternator assembly.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images...
Underdrive Belt
(Pro 7" Kit)
This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley with alternator assembly.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images...
Power Steering Pump Belt
(Rock Assault)
Replacement belt for Rock Assault power steering kits. Don't get caught out on the trail without a spare!
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support...
OEM Water Pump Gasket
Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...
Oil Pan Mounting Hardware Kit
This complete oil pan hardware kit includes all the high-quality bolts and washers needed to properly install both your oil pan and the oil pickup tube.
Important Fitment Note
This kit is strictly designed to work...
Oil Pan Hardware Kit
(Silicone Seal)
This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with silicone seal pans only. This kit will not work with gasket...
8" Oil Dipstick Tube Bracket
(Shorty Style)
OEM part direct from Toyota! Don't look any further for a new replacement dipstick Tube Bracket to replace your old one. This is the shorty style dipstick tube bracket found on most 22R and 22RE applications...
Seal Saver
(Front Balancer)
Do you have a pesky oil leak coming from the harmonic balancer? Don't just keep swapping out front seals. Press this seal saver into the harmonic balancer seal surface to keep the seal riding on a beautiful smooth finish...
OE PCV Valve
(Steel)
A Factory replacement OE PCV valve with steel design straight up outlet. Use this PCV to replace the stock one that has the molded rubber hose. Don't forget the new PCV grommet, see Part #: 1024084 or the new hose from Toyota see...
OEM Crankshaft Main & Camshaft Bolt
This is a brand new, genuine OEM Toyota factory replacement bolt. In a unique piece of factory engineering, Toyota uses this exact same high-strength bolt for two critical applications on the 20R and 22R-series...
Teflon Heat Isolation Gasket
(Throttle Body)
Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate...