Tube Kit Only (LC Pro Air Intake)
Not Smog Compliant
The LC Pro Intake Tube replaces your restrictive factory plastic intake system with a 2 1/2" mandrel bent ceramic-coated stainless steel tube while retaining the factory inlet and air box. CNC mandrel bending guarantees optimum flow from the intake pipe. This kit is compatible with a K&N stock replacement air filter or the K&N FIPK kit. The combination of these parts will result in even more performance, towing capacity and increased fuel efficiency. The installation for the intake system takes less than half an hour and requires only standard hand tools; all other hardware and parts needed for installation are included in the kit. The LC Engineering Hi Flow Crossover Intake Tube System feeds your truck or 4 Runner the cool air it needs to perform.
Features:
- Custom-designed and engineered for your specific year, make, model and engine
- CNC mandrel bending guarantees optimum flow from the ceramic-coated stainless steel intake pipe
- LC Engineering Hi Flow Crossover Intake Tube boost horsepower, torque, and even your MPGs
- Hi Flow Crossover Intake Tube System install easily with a complete silicone soft-mount hardware kit and detailed instructions
- LC Engineering Hi Flow Crossover Intake Tube System are made in the USA
- Comes with LC Engineering Decal
NOTE: If you have an import replacement radiator that mounts 1" to 3" away from the radiator support, this kit will not work.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1989-1995 22RE 2.4L Pickup
- 1989-1995 22RE 2.4L 4Runner
To open a printable PDF version of this instruction CLICK HERE
NOTE: Prior to installing this air intake kit, it is imperative to perform a thorough cleaning of the air tube using a mild detergent and water to eliminate any accumulated debris or contaminants. Failure to do so could result in potential engine damage.
LC Engineering's Pro intake tube has been designed to fit on a stock air box application or with a K&N filter kit.
Installation:
-
1. Remove plastic intake tube from air meter to throttle body. Leave the rubber boot on the throttle body, as this new tube still uses it.
2. Remove auxiliary ¾" tube from air box and air valve resonator
3. Install new intake tube with supplied clamps and silicone hose couplers
4. Straight hose coupler goes to the air meter side of tube and the 45 hose goes to the throttle body side of intake tube.
5. Tighten clamps snug. Do not over torque clamps.
6. There are two options on the ¾" bypass tube that goes from the resonator back into the air filter: 1. To retain the air tube from the air filter to the air valve resonator, install 3â„4" hose between the resonator and the air box. Clamp both ends snugly. 2. To remove this air tube, simply install the supplied vacuum cap to the air box where the old tube came out, then install the supplied breather to the top of the resonator and tighten clamp snugly. Do not over-torque or you cam damage the resonator
7. Perform final fit check by verifying that the new tube kit clears all moving engine parts such as the fan, pulleys, belts etc...
15 Reviews Hide Reviews Show Reviews
-
LC Pro Air Intake Tube Kit 85-89
Great quality, packaged very well, comes with K&N vent filter and cap to accommodate "air valve resonator and tube". Very complete package.
-
intake
To shinny for me. But fit good.
-
Great Kit
I ordered this for my 1992 Pickup w/22RE 5-speed. I had to cut about 1/2" off each end of the angled hose to get the correct fitment, once that was done it was a perfect fit. I'm using the stock airbox and filter but modified it to allow better breathing. Other mods are a 3/4" lift, KYB shocks, bigger tires on 15" alloy rims, and timing advanced an extra 1 degree. It has 68,000 miles and I'm the original owner. Raced a wannabe Saturn, blew it away, now everyone wants to buy my truck.
-
Intake tube kit
Awesome looking kit that replaced a split and JB Welded back together factory pipe. My only suggestion would be to offer the kit with or without the K&N filter. I installed the LC Header, EGR block off and the two filters on the valve cover as well as doing away with all the secondary air so the K&N was a redundant piece.
-
Intake tube
Wow... This part was definitely worth the price. Very marked difference in the smooth power flow of the engine.. Great product..
-
PRO AIR INTAKE TUBE KIT
I absolutely can’t say enough about this product. A little on the spendy side for a tube, two silicone fittings and 4 hose clamps but I have gotten so many compliment on the way it looks and you can hear the motor taking in giant gulps of fresh air. I found out that my pickup did have an aftermarket radiator and I had to shorten the fittings to accommodate that. But it was an easy fix and everything looks and performs amazing. If i could make a suggestion it would be to have colored rubber/silicone fittings. Thank you LCE.