Odds and Ends

Ram Clamp (w/ Weldable Mount) These mounts are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig. The clamps have a 2.5″ ID and the Weld-On Mount is made out of 1020 billet steel. These Weld-On Ram Mounts are...

Steering Rod Bungs (Weld In) Finally a weld in bung with the thread pitch of an FJ80 Tie Rod Ends, which is the most commonly used Tie Rod Ends in Toyota hi-steer kits. Once welded into your tie rod or drag link, this bung will allow you to make a...

IFS Steering Box Fitting (Low Pressure) This is a Trail Gear low pressure IFS steering box fitting. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174...

Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are machined from solid billet so you will never have to worry...

Hydro Assist Bracket (OEM Axle Housing / Rock Assault Axle Housing / Tie Rod) Our mounting brackets have a 3/4" or 5/8" bolt hole. The Hydro Assist Brackets are designed to fit a OEM Toyota solid axle front housing, Rock Assault Axle Housings and 1.25"...

Shim Pack (Six Shooter Knuckle) Shim pack for 6-shooter knuckles. In order to maintain proper steering geometry and prevent binding or mis-alignment, we offer this assortment of shims. Contact our Tech Support Line for further information at...

ARP Heavy Duty Steering Knuckle Stud Magnum knuckle studs are stronger than any other stock replacement Toyota knuckle stud on the market. These heavy-duty studs are manufactured by world-renowned bolt manufacturer ARP (Automotive Race Products). Each...

Power Steering Pump Belt (Rock Assault) Replacement belt for Rock Assault power steering kits. Don't get caught out on the trail without a spare! This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support...

Power Steering Reservoir Bracket (Trail Gear) This Reservoir Bracket makes it easy to bolt in the reservoir on most 4cyl 4X4 Toyota applications from 1979 - 1995. Includes mounting hardware. NOTE: Does not include reservoir. Unpainted finish...

Steering Box Fitting (High Pressure) This special fitting is used to connect the high pressure steering hose to the steering box. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

Sector Shaft Nut and Washers Replacement nut and washer for bolting on pitman arm to steering box. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174...

1/4" Pipe to #6 JIC If you have an IFS steering box and want to tap your own box, this is the fitting you need to do it. This fitting has a male 1/4" pipe fitting on one end and male #6 JIC fitting on the other. NOTE: (2) fittings are required for...