Extra-Flex Extended Front Leaf Springs
(5″ Lift)
Trail-Gear leaf springs are flexible on the trail yet hold their lift year after year. Springs are pre cycled and lot tested to maintain quality. Nylon pads between the leaves reduce noise and allow...
+3.5" Lift Kit w/ Shocks
(Fabtech)
This 3.5″ Performance System for the Toyota pickup utilizes Fabtech heavy-duty upper control arms to achieve front lift and add-a-leafs bring up the rear. Finishing off the suspension kit is front and rear, twin...
Trail-Link Four Crossmember
You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69".
This product should not be used in a manner that violates Federal EPA Laws.
Contact...
LC Engineering Rear Leaf Spring Set
(Stock Height)
For quite some time, LCE has been offering an extra-flex extended leaf spring for Toyota Pick-up and 4Runner’s. Quite a few of our customers are not in need of such an aggressive suspension...
DJM Lowering Kit
(3" Front & 3" Rear)
Bolt in control arms will drop your front end with out making any load changes on your torsion bars. This is very cool because you won't destroy your ride when you lower! Add DJM's famous Universal Lowering Block...
DJM Lowering Kit
(3" Front & 4" Rear)
Bolt in control arms will drop your front end 3″ with out making any load changes on your torsion bars. This is very cool because you won’t destroy your ride when you lower! Add DJM’s famous Universal...
LC Engineering Rear Leaf Springs
(Stock Height)
For quite some time, LC Engineering has been offering an extra-flex extended leaf spring for Toyota Pick-up and 4Runner’s. Quite a few of our customers are not in need of such an aggressive...
LC Engineering Rear Leaf Spring Set
(Stock Height)
For quite some time, LC Engineering has been offering an extra-flex extended leaf spring for Toyota Pick-ups and 4Runner’s. Quite a few of our customers are not in need of such an aggressive...
LC Engineering Rear Leaf Springs
(Stock Height)
For quite some time LC Engineering has been offering an extra-flex extended leaf spring for Toyota Pick-ups and 4Runners. Quite a few of our customers are not in need of such an aggressive suspension...
DJM Calmax Lowering Control Arms
(3" Front)
Bolt in control arms will drop your front end 3″ with out making any load changes on your torsion bars. This is very cool because you won’t destroy your ride when you lower!
NOTE: Does NOT include...
Front Leaf Spring Hanger Kit
(Extra-Flex Springs)
Hanger kit allows of hanging of leaf springs on 1986-1995 Toyota Pick-Ups and 4Runners. Kit designed to work with many 3" - 6" lift aftermarket springs. Frame jigs make it easy to place shackle tubes in...
25mm Torsion Bars
(Sway-A-Way)
Sway-A-Way’s high-performance torsion bar set for 1984-1995 2WD 5 Lug Toyota Pickup’s is perfect for owners looking to improve their vehicles suspension. Our torsion bars are designed to work with raised or...