-
OEM Clutch Release Fork Sub-Assembly OEM Toyota OEM Clutch Release Fork Sub-Assembly. OEM Toyota Part #: 31204-35031 Contact our Tech Support Line for further information at 928-575-2174...$66.91 -
Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal...$66.80 -
Driveline Spacer 1.5" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at...$62.54 -
Driveline Spacer 1" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at...$62.54 -
27 Spline Drive Shaft Triple Drilled Flange (w/o Dust Cover) Has all the common 1984-1995 patterns in one, universal output flange. Includes 4cyl CV and Non CV patterns as well as V6 CV pattern...$59.99 -
27 Spline Transfer Case Triple Drilled Flange (w/ Dust Cover) Has all the common 1984-1995 patterns in one, universal output flange. Includes 4cyl CV and Non CV patterns as well as V6 CV pattern...$59.99 -
27 Spline Transfer Case Triple Drilled Flange (w/ Dust Shield) Has all the common 1984-1995 patterns in one, universal output flange. Includes 4cyl CV and Non CV patterns as well as V6 CV pattern...$59.99 -
Rear Axle Bearing Pocket These rear axle bearing pockets fit most Toyota Pickup and 4Runner axles made from 1979 to 1995. This bearing pocket is made from 4340 chromoly and allows you to use our...$59.99 -
Koyo Front Wheel Bearing Kit (Made in Japan) We are constantly asked whether we have Koyo Front bearings for the 79-85 4wd Toyota Pickups and 4Runners. Well, we listened. LC Engineering now stocks...$58.21 -
Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for...$55.64 -
Inspection Plug Installation Kit Extra large differential fill and inspection cap. Designed to allow quick access for inspecting the ring gear. Features1.5" diameter access hole. Threaded aluminum...$51.99 -
Stick Shift Boot (Twin T-case) This boot is designed to work with our Creepy Twin T-Case shifter (above). It features a flexible rubber shell with a steel bottom plate for mounting to your floor...$49.99
-
fast shipping
Speed Delivery