Odds and Ends

Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...

Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...

Panhard Link Tubing (Front 3-Link) This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. This product should not be...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...

Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link...

Front 3-Link Lower Link Axle Bracket (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Rear Upper Shock Mount This rear shock mount from Low Range Off-Road is designed to allow shocks to be moved on top of the axle and tilted inward for maximum travel. This weld-in item is designed to use eye mount shocks and is constructed of 3/16"...

Johnny Joint 1.25" Rod End (Right Threaded) Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.625" wide ball center with a...

2.5" Energy Suspension Bump Stops Polyurethane Bump Stops Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Features: Low profile competition style bump stop...

Creeper Joints (Choose Your Size) These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from...