-
Coil Adapter Wire (20" Long) Have you updated the ignition on your 20R/22R/22RE/3VZ but haven't gotten around to replacing the distributor yet? No problem, LC Engineering has that special coil wire...$21.69 -
Street Distributor Cap (Clip Style) This is a OE style replacement distributor cap for the older clip style distributors.The cap is the smaller 3" cap vs the larger late model screw down caps that...$19.52 -
D.U.I. Distributor Rotor This is the replacement rotor for the D.U.I. Distributors. Will only work with D.U.I. 4 Cylinder Distributors. Contact our Tech Support Line for further information...$15.40 -
Coil Wire Adapter (Converts To HEI Style End) This coil wire adapter is perfect for off road vehicles or other applications that see severe service. The clip on this adapter plug keeps the wire...$12.45 -
Vacuum Advance Plug (Distributor) When removing the vacuum advance on your factory distributor, this plug will keep foreign debris from entering the hole and causing problems. Only for a...$11.31 -
Plug Wire Separator Kit Pro Wires (8.5mm) - Black These composite separators are held together with allen head screws which are mounted flush within the loom. These separators are designed...$11.31 -
Plug Wire Separator Kit (8.5mm Pro Wires) These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to...$10.88 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support...$9.85 -
Pro Distributor Rotor The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor,...$9.38 -
NGK Spark Plug R5672A-8 (10-18 Psi / 14:1 Comp) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove...$8.68 -
Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to...$8.19 -
Street Distributor Rotor An OE quality rotor with the brass center electrode for the best transfer of spark. This rotor fits the small 3" caps found on 20R works with th 1975 to 1978 clip style of...$6.68
-
fast shipping
Speed Delivery