Odds and Ends

OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...

Evans High Performance Waterless Coolant Evan high performance waterless coolant - engineered specifically for all gasoline and light duty diesel engines.Use in cars, trucks, boats, and light aircraft. Waterless Coolant for: For all gasoline engines,...

Evans Waterless Coolant Prep Fluid Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be...

Evans Waterless Coolant Prep Fluid (1/2 Gallon) Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable...

Evans Cooling Analog Refractometer A refractometer is a laboratory or field device for the measurement of an index of refraction (refractometry). Evans Cooling refractometers are used to measure the final water content of a conversion and uses a Brix...

Water Temp Sender Manifold (Inline Radiator Hose) If you want to add a real water temperature gauge to your Toyota, instead of the factory "idiot light", we have the solution. LC Engineering's in-line temperature sending unit manifold is made out of...

OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...

1 3/4" Radiator Cap (Small) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the small one that...

Radiator Inlet Hose Clamp Ensure your cooling system restoration is complete with the LC Engineering OEM Radiator Inlet Hose Clamp. At LC Engineering, we believe that no part is too small to overlook when it comes to the reliability of your engine. This...

Hose Clamp for Radiator (Outlet #1 & #2) LC Engineering is now offering an OEM hose clamp for your radiator (specifically outlet #1 &#2). Don't see what you need? Call our sales team, they might be able to track it down for you. OEM Toyota Part...

High-Pressure Radiator Cap  The LC Engineering Large Radiator Cap is a critical component for maintaining the correct pressure in your Toyota’s cooling system. Measuring 2-1/4" (57mm) in diameter, this cap is designed to fit a wide range of...

OEM Coolant Bypass Hose Clamp If you have ever had to connect the lines on the bottom of your throttle body, you know the foresight needed to get everything lined up properly to fit your long nose pliers in for the final step. Well, we here at LC have...