-
U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...$46.85 -
3mm Allen Wrench (Ball Head) This 3mm allen wrench is used mainly for our TPS screw upgrade kit. The ball end of the wrench allows off angle access to the TPS screws. This makes adjusting the TPS a lot easier if you are doing it in the vehicle. NOTE:...$8.19 -
Fuel Pressure Gauge "T" Fitting (5/16" Hose to 1/8" NPT) This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...$15.45 -
Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...$123.13 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
K&N 77 Series F.I.P.K. (77-9031-1KP) The K&N 77-9031-1KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Tundra and Sequoia models. The restrictive factory air...$519.11 -
K&N 63 Series F.I.P.K. (63-9031-1) A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable,...$432.59 -
K&N Air Filter Foam Wrap (25-3900) The K&N Airforce Pre-Cleaner is a specially designed foam filter wrap made to extend the service interval of your K&N air filter when used in very dusty conditions. The Airforce Pre-Cleaner is designed to be cleaned...$54.06 -
K&N Air Filter Foam Wrap (25-3340) The K&N Airforce Pre-Cleaner is a specially designed foam filter wrap made to extend the service interval of your K&N air filter when used in very dusty conditions. The Airforce Pre-Cleaner is designed to be cleaned...$57.31 -
K&N Universal Air Intake System (RC-5052AR) K&N's APOLLO CIS is a universal "Cold Air Intake System". The Apollo's specially designed shape increases volumetric efficiency and is made of durable lightweight material for cooler air intake. The Apollo...$270.36 -
K&N Filter Care Service Kit (Squeeze Red / 99-5050) K&N Recharger Kit 99-5050 is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced. The kit comes with K&N Power Kleen air filter cleaner and K&N air filter oil...$19.46
-
fast shipping
Speed Delivery