Performance and replacement parts for the 2nd gen Toyota Tacoma — 1GR-FE 4.0L V6 and 2TR-FE 2.7L I4. Turbo kits, headers, exhaust, suspension, and OEM-spec rebuild components from LCE.
K&N Air Filter Oil
(99-0516)
K&N 99-0516 is a 12.25 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N...
K&N Air Filter Oil
(99-0504)
K&N 99-0504 is a 6.5 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N...
Piston Stop
(Adjustable)
These Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. This stop will work...
Energy Suspension Bed Mounting Pads
Perfect for custom isolator mounts, Energy Suspension polyurethane pads come in various sizes and shapes to allow for a wide range of fabricating options. They can...
Fuel Pressure Gauge "T" Fitting
(5/16" Hose to 1/8" NPT)
This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs...
Weld On Bung & Plug Kit
(Thread-In Bosch Style)
If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge,...
Water Pump Gasket
(OEM)
Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace...
Silicone Adapter
(2.5“ I.D. to 2.75″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme...
Silicone Adapter
(2.5 “ I.D. to 3.0″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own...
Oxygen Sensor Install Kit
(2-Bolt Style)
This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you...
2-Bolt Flange
(2 1/4")
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust...
2-Bolt Flange
(You Choose Size)
2 1/4" Flanges:
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8"...
The second-generation Toyota Tacoma (2005–2015) is the longest-running Tacoma generation, with eleven model years of production behind it. It carries two engines: the 2TR-FE 2.7-liter four-cylinder (a continuation of the 1st gen 3RZ family architecture) and the 1GR-FE 4.0-liter V6 that replaced the 5VZ-FE as the V6 option. The 2nd gen is the truck that established the Tacoma as the dominant midsize platform in North America, and there is a very large active-driver population still on the road today.
LCE supports the 2nd gen Tacoma with turbo kits (our 2nd gen turbo kit page is one of our best-performing in this catalog), headers, exhaust components, suspension upgrades (lift kits, lowering kits), brake upgrades, and the OEM-spec replacement parts that keep these trucks running. Our V6-specific product is concentrated on bolt-on performance — naturally aspirated and forced induction — rather than long-block work.
Browse 2nd gen Tacoma parts above by system, or jump to a related generation: