Performance and replacement parts for the 2nd gen Toyota Tacoma — 1GR-FE 4.0L V6 and 2TR-FE 2.7L I4. Turbo kits, headers, exhaust, suspension, and OEM-spec rebuild components from LCE.
Energy Suspension Bed Mounting Pads
Perfect for custom isolator mounts, Energy Suspension polyurethane pads come in various sizes and shapes to allow for a wide range of fabricating options. They can...
Hose Clamp for Radiator
(Outlet #2)
LC Engineering is now offering an OEM hose clamp for your radiator (specifically outlet #2).
OEM Toyota Part #: 90467-38001
Contact our Tech Support...
Weld On Bung & Plug Kit
(Thread-In Bosch Style)
If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge,...
OEM Balancer Bolt
We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with a large flange. The...
OEM "J" Bolt
(Battery Hold Down)
OEM Toyota "J" bolt for battery hold down bracket.
OEM Toyota Part #: 74451-89103
Contact our Tech Support Line for further information at 928-575-2174...
Water Pump Gasket
(OEM)
Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace...
Street Valve Shim
(Stock Bucket / 2.50mm - 2.85mm)
Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft...
Street Valve Shim
(Stock Bucket / 2.90mm - 3.30mm)
Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft...
Oxygen Sensor Install Kit
(2-Bolt Style)
This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you...
2-Bolt Flange
(2 1/4")
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust...
Silicone Adapter
(2.5“ I.D. to 2.75″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme...
Valve Shim
(2.20mm - 2.55mm)
Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines,...
The second-generation Toyota Tacoma (2005–2015) is the longest-running Tacoma generation, with eleven model years of production behind it. It carries two engines: the 2TR-FE 2.7-liter four-cylinder (a continuation of the 1st gen 3RZ family architecture) and the 1GR-FE 4.0-liter V6 that replaced the 5VZ-FE as the V6 option. The 2nd gen is the truck that established the Tacoma as the dominant midsize platform in North America, and there is a very large active-driver population still on the road today.
LCE supports the 2nd gen Tacoma with turbo kits (our 2nd gen turbo kit page is one of our best-performing in this catalog), headers, exhaust components, suspension upgrades (lift kits, lowering kits), brake upgrades, and the OEM-spec replacement parts that keep these trucks running. Our V6-specific product is concentrated on bolt-on performance — naturally aspirated and forced induction — rather than long-block work.
Browse 2nd gen Tacoma parts above by system, or jump to a related generation: