Water Pump
When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. We have the highest quality Toyota water pumps in stock all of which are new OEM quality Japanese-manufactured (Nissan or Aisin) pumps. The water pump gasket will be included with the pump. Don't be left stranded or damage your new or rebuilt engine because of a simple water pump. If you have any questions feel free to give us a call and we would be glad to help. This water pump is also utilized in our Dual Row Timing Chain Conversion Kit's, see Part #: 1015012.
NOTE: The most common water pump failure is due to over tighten V- belts. An incorrectly adjusted fan belt may shorten the life of the belt or the water pump. After you install your belt, you should have 5/8" - 3/4" of slack when pushing the belt with your thumb. The belt can be twisted about a quarter turn when the tension is correct. As per a Toyota Factory Service Manual, the drive belt should be 125 +/- 25 lbs. measured with a Nippondenso BTG-20 (95506-00020) or a Burroughs BT-33-73F.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- September of 1977-1980 20R 2.2L Engines
- 1981-1984 22R 2.4L Engines (w/ Factory Dual Row Timing Chain)
- 1983-1984 22RE 2.4L Engines (w/ Factory Dual Row Timing Chain)
- 1985-1995 22R 2.4L Engines (w/ Dual Row Timing Chain Conversion Kit)
- 1985-1995 22RE 2.4L Engines (w/ Dual Row Timing Chain Conversion Kit)
- 1985-1988 22RET 2.4L Engines (w/ Dual Row Timing Chain Conversion Kit)
12 Reviews Hide Reviews Show Reviews
-
Street Water Pump - 20R(9/77-80) or 22R(81-84)
correct fit
-
Street pump
Great stuff u guys do down there in Az
-
Look at thi impeller
These water pumps have a, cast pressed on, impeller that will direct coolant better without causing turbulence in the pump. The part store pumps use a stamped steel impeller held with a treaded nut. Lots of turbulence and less flow this way. Look at what goes in the part, don't go cheap.
