Performance and replacement parts for the 1st gen Toyota 4Runner — 22R, 22RE, factory-turbo 22RTE (1986-1988), and 3VZE 3.0L V6 (1988-1989). LCE's 22R-era catalog applies directly: long blocks, the LCE Stroker, Stage 2-5 camshafts, headers, supercharger and turbo kits, and OEM-spec components.
OE Lower Ball Joint
When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest, OE replacement. This is the same...
Clutch Throw Out Bearing
The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal...
Oxygen Sensor
(Heated 4 Wire)
This is considered a universal replacement for the 4-wire heated O2 sensor as well as a stock replacement. This would be an upgrade to the one wire but will require...
Water Pump
When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. We have the highest quality Toyota water pumps in stock all of which...
Pro H-Beam Connecting Rod Bolt Set
Prevent catastrophic bottom-end failure and secure your engine's rotating assembly with high-strength replacement fasteners. Under the continuous stress of high-RPM...
Aisin OEM Fan Clutch
Keep your engine operating within its optimal temperature range and protect your rig from overheating with a premium Aisin OEM Fan Clutch. As a trusted global leader in original...
Header Flange
(You Choose Style)
Steel header flange for custom fabrication of exhaust header on 20R, 22R, or 22RE engines. 1/2" thick flange with 1-1/2" or 1 5/8" ports. This header flange is the...
OE Pitman Arm IFS
Original Replacement for that wore out Pitman arm. We all know that if one of your suspension-steering components is not working properly, it will eventually affect your tire...
Electric Fan Relay Set
(w/ Sensor)
Allows you to control what temperature the electric fan turns on (adjustable 180-240).
Contact our Tech Support Line for further information at 928-575-2174...
Weatherstrip Kit | Front Window Outer Belt
Looking to replace your dried-out or worn-out window seals? We have teamed up with Fairchild Industries to bring you a comprehensive line of premium...
Street Tune-up Kit
(w/ Plug Wires)
A tune up kit that won't break the bank, for your 1980 to1992 20R/22R/RE from LC Engineering. Included are (4) NGK Spark Plugs BKR5EYA, a set of Denso Spark Plug...
Driveline Spacer 1.5"
(Longfield)
Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts.
Contact our Tech Support Line for further information at...
The first-generation Toyota 4Runner (1984–1989) is the original factory 4Runner and shares its chassis, engines, and most of its drivetrain with the contemporary 4th gen Toyota Pickup. The engine lineup is the LCE specialty zone: the carbureted 22R 2.4-liter (1984-1987), the fuel-injected 22RE (1985-1989), the factory-turbocharged 22RTE that ran from 1986 through 1988 in very low volume, and the 3VZE 3.0-liter V6 introduced for 1988. The 1984-1985 trucks ran a solid front axle; 1986 onward got the IFS (Independent Front Suspension) revision shared with the Pickup.
LC Engineering has been building performance and replacement parts for the 22R, 22RE, 22RTE, and 3VZE since 1985 — the entire production life of the 1st gen 4Runner and longer than most owners have had their trucks. Our 1st gen 4Runner catalog includes complete long blocks and crate engines, the LCE Stroker (2.7-liter displacement increase), Stage 2 through Stage 5 camshafts, header kits, supercharger and turbo kits, master rebuild kits, suspension components for both the solid-axle and IFS trucks, and the OEM-spec replacement parts that keep these 35+ year old 4Runners on the road.
Browse 1st gen 4Runner parts above by system, or use these starting points: