-
Round Hub Gasket (Front Hub) This OEM Toyota gasket comes in handy when rebuilding or replacing your hubs. It goes at the base of the locking hub assembly. If you plan on working on your front end have one ready to go as they seem to always rip. OEM...$1.54 -
Front Hub Star Gasket These gaskets come in extremely handy when rebuilding your front hubs. These star-shaped gaskets are used for the front cover of the 4wd hub assembly. OEM Toyota Part #: 43531-60010 Contact our Tech Support Line for...$3.52 -
Unit Hub (Dana 60 / 9" Housing) These unit hubs are not just another aftermarket 1-ton unit hub that has been machined down and modified from an 8 lug to a 6 lug application. This hub has been designed for a specific application, so these 1-ton unit...$547.00 -
Dana 60 Drive Flange Kit Tired of breaking your manual locking hubs on the trail? Well we have a great solution to that problem, our new Dana 60 Drive Flange Kit (35 spline). This kit will replace your existing 35 spline internal locking hubs or your...$302.84 -
Longfield Chromoly Hub Gears Set (Inner and Outer / IFS) When you run bigger tires, you put more strain and wear on your axles and hubs creating more failure points. Keep your rig running problem-free with Longfield OEM replacement hub gears made...$297.00 -
Transfer Case Rebuild Kit (Major) This kit contains all the bearings and gaskets to do a rebuild on the Transfer Case. This is classified as a “Major″ overhaul kit. Kit Includes: Gaskets Seals Transfer Case Bearings & Roller Bearings...$547.00 -
Transfer Case Rebuild Kit (Minor) This kit contains all the bearings and gaskets to do a rebuild on the Transfer Case. This is classified as a “Minor″ overhaul kit. Kit Includes: Gaskets Seals Transfer Case Bearings (SKF, NSK, NACHI and...$374.61 -
Top Shift T-Case Conversion (Kit A) Need to convert a forward shift case to top shift? We have a great kit that will get the job done. Our kit is made with ALL new parts, and is already machined to accept a 4.7 input gear. Kit Includes: 2 Shift...$214.10 -
Top Shift T-Case Conversion (Kit B) When doing a top shift conversion on a forward shift T case, you will need a block off plate to block off the old (unused) hole in the transmission that the forward shift shifter was in. In addition to that you will...$305.59 -
Top Shift T-Case Conversion (Kit C) When doing a top shift conversion on a forward shift T case, you will need a block off plate to block off the old (unused) hole in the transmission that the forward shift shifter was in. In addition to that you will...$406.70 -
Pro Clutch Disc (9 1/4″) Already have a LC Pro clutch kit and Just need to replace the disk? Here you go! Just slip one of these in place of your old worn out disk and you will be good to go. This is the replacement disk for our 9 1/4" Pro Clutch kits...$183.80 -
Street Clutch Kit (9 1/4") The Street Clutch Kit is a great factory replacement clutch assembly that won't sacrifice quality and dependability. Clutch kits come with the pressure plate, clutch disc, pilot bearing, throw out bearing, and a new alignment...$216.25
-
fast shipping
Speed Delivery