Suspension

Rear Wide 5.5" Shackles (Pair) These Trail Gear spring shackle kits are designed to replace the factory shackles with extreme lift kits. These spring shackle kits feature high grade polyurethane bushings and greasable bolts for superior service life...

Rear Wide 6" Shackles (Pair) These Trail Gear spring shackle kits are designed to replace the factory shackles with extreme lift kits. These spring shackle kits feature high grade polyurethane bushings and greasable bolts for superior service life. The...

Rear Shackle Mounts If you're installing longer rear springs you may need to relocate your rear shackle mount. You can do this by cutting off the original units with a die grinder and then welding them back on. You can also cut off the old ones and...

18mm Shackle Mount (Pair) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint shackle mounts are...

Air Shock Hoop Mounting Kit Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all...

Toytec 1" Block & U-Bolts Kit Includes: Solid T6 Aluminum blocks with pressed in steel pin. Includes new u bolts w/hardware, and two blocks. 1" lift block kit works with add-a-leafs and/or shackles for an additional inch of rear lift. Fits All...

Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...

Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...

Panhard Link Tubing (Front 3-Link) This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. This product should not be...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...

Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link...