Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...

Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used in a manner that violates Federal EPA Laws. Contact...

Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link...

Shock Mounts These shock mounts are designed to weld directly on to the Rock Assault™ Front Axle Housing. NOTE: Sold as a pair. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...

Air Shock Hoop Mounting Kit Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all...

Rock Assault 6-Ply Limit Strap (You Choose Length) Trail-Gear introduces the industry's first 6-layer, 1.75" nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that have been zinc-plated for corrosion-resistance...

Limiting Strap Clevis Kit Looking for an easy way to mount your limit straps? Trail Gear is now offering a Clevis Kit for your limiting straps in both single and multiple strap configurations. Our Clevis kits are made out of Super Metal Chromoly Steel...

2.5" Energy Suspension Bump Stops Polyurethane Bump Stops Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Features: Low profile competition style bump stop...

Rear Upper Shock Mount This rear shock mount from Low Range Off-Road is designed to allow shocks to be moved on top of the axle and tilted inward for maximum travel. This weld-in item is designed to use eye mount shocks and is constructed of 3/16"...

Ultimate Chevy Leaf Spring Hanger Kit (Low Range Off-Road) Our Chevy Leaf Spring Hanger is just like the very popular sloped style hangers but with an inside diameter of 3" and a 9/16" bolt hole. Use these for mounting up the fixed end of the Chevy...