Home > ENGINE > TOP END > Camshafts & Cam Gears > Camshafts >

EFI Pro Camshaft 22RE/RET
EFI Pro Camshaft 22RE/RET


Our Price: $239.95

NOTE:: Usually Ships in 1 to 2 Business Days
Part Number: 1022021

Optional Upgrades

Would you like to add Rocker Arms?*:


Pro Cam EFI Camshaft 22RE/RET

LCE's EFI Pro Camshaft is an excellent upgrade to any mild engine application that requires the use of the factory fuel injection setup. This cam is also designed to work with the factory valve train components so you will not have to upgrade springs, retainers etc... With a smooth idle and broad power band, this cam will allow your 22R/RE to run better and still retain it's drivability. LC Engineering is constantly striving to improve both the quality and performance of our products. We test our camshafts on the street, race track and off-road.

The results are an improved line of camshafts that offer a broader selection of grinds, increased horsepower and higher quality. All LC Engineering Camshafts are ground on new billets and double heat treated for long life. Each has been designed for maximum torque and horsepower, specifically for application. When comparing camshaft profiles, always reference the duration @ .050" valve lift. Choosing the correct camshaft and matching valve train components is crucial for maximum performance and reliability. LC Engineering offers a full selection of valve train components for your cylinder head.

Buyer beware on reground rockers in the market. Regrinding the pad on the rocker can remove the heat treated portion of the pad making for a soft rocker. Rocker arms that are reground will not have the factory geometry of a stock rocker. To regrind a rocker will take care of the face surface but will do nothing to address the rocker shaft bore, a loose rocker bore will make adjustment difficult and will never be correct which is why we cannot warranty a camshaft unless new rockers are purchased with a camshaft.

Questions? Call our customer service department for a recommendation. We'll make sure to get you the perfect cam to maximize your combination!

20R/22R - EFI Pro Camshaft
Smooth Idle (1200-5000 rpm range)
Throttle Body, Filter Charger, 1 1/2" Header

Intake Exhaust
Valve Lash .008 .012
Valve Lift .442 .442
Advertised Duration 237° 240°
Duration @ .050" 216° 219°
Lobe Center 102° 119.5°
Lobe Separation 110°

Intake Opens 6° BTDC

Intake Closes 30° ABDC

Exhaust Opens 49° BBDC

Exhaust Closes -10° BTDC

NOTE: Always check valve to piston clearance and valve to valve clearance with this camshaft! Failure to install this cam with matched valve train components can cause engine damage.

WARNING: LCE highly recommends using our Pro Camshaft Kit Part# 1020000 in order to allow proper spring retainer to guide clearance for any cam that has over .450" lift or in any application that requires a sustained RPM of 6,000 or higher. LCE also recommends replacing rocker arms with a new set; Part# 1023015 or a complete rocker assembly Part# 1023018 to avoid any damage to your new camshaft.

LCE will NOT warranty any cam damage if you do not purchase new Toyota rocker arms from LC Engineering, or a complete rocker arm assembly from LC Engineering at the same time as purchasing our camshaft.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Average Customer Review: 5 of 5 Total Reviews: 6 Write a review.

  0 of 0 people found the following review helpful:
There was a reason these were out of stock November 5, 2018
Reviewer: Damian Grant from , Victoria Australia  
The machining and superb quality of the fit and finish is out right crazy for the money, can't wait to hear it rip!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
EFI Pro January 31, 2017
Reviewer: Andrew Napoleon from Vancouver, WA United States  
I purchased the LCE efi pro cam and rocker arms. Let me tell you, the top end is amazing. I use my truck as a daily and do a lot of freeway driving and so far it has been amazing. Can't go wrong with a LCE cam.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
EFI PRO camshaft rocks April 1, 2016
Reviewer: J Robinson from Tallahassee, FL United States  
I ordered the EFI Pro camshaft with  the rocker arm assembly kit and it was all I needed to get my truck back in tip top shape. It's a perfect match for needs which is a cross between torque and high end RPM's. I couldn't be happier with how well my truck runs now :)

Was this review helpful to you?

  1 of 1 people found the following review helpful:
EFI camshaft December 7, 2015
Reviewer: Lucas from Denver , CO United States  
Installed the new EFI camshaft and have seen a noticeable improvement in low end torque. To test it went on some steep grades. Needless to say I didn't need to down shift on the ascent, and actually gained some speed. To anyone who owns a 22re in a 1 gen runner, you know how miraculous that is.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
High quality camshaft. March 31, 2014
Reviewer: Joe Clark from Eastern North Carolina  
Looks really good, nice quality, no burrs.  I am a Machinist, and i have a keen eye for metalworking flaws..  I can see no flaws or tolerance issues..   My only complaint would be I wish  there were some break in tips...  As a first time cam installer it would give me a little more confidence if I knew a recommended break in lube and a good procedure for RPMs to run it at..  Although I have no doubts that one call to LC and they would be glad to tell me all I need to know.

Was this review helpful to you?

View All Customer Reviews