Home > ENGINE > TOP END > Valve Train Components > Valve Springs >

Street Performer Valve Spring Set - 20R/22R/RE/RET
Street Performer Valve Spring Set - 20R/22R/RE/RET



 
Our Price: $59.95

Part Number: 1023201
Qty:

Details
 

Street Performer Valve Spring Set(8) - 20R/22R/RE/RET

The proper set of matched valve train components will eliminate most valve train problems. The LCE Street Performer Valve Springs fit in the stock spring pockets and install with all of the stock valve train components.

The Street Performer Springs will control your valves up to 5500 rpm, with a valve lift of .450. For higher valve lift you should use the LC Pro Dual Valve Springs (Part #1023198) with LC Titanium Retainers (Part #1023003). The installed height of the LC Street Performer Valve Springs is 1.620 - 1.630. Spring seat pressure should be 70 psi at 1.625". Spring coil bind is at 22.3mm / .878" Install using the appropriate spring shim.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.


Average Customer Review: 5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
 
Great service! February 5, 2018
Reviewer: William Heustess from Vale, NC United States  
I am still in the process of putting my engine back together but the quality and service is great. Can’t wait to see the difference in performance!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good suggestion September 22, 2014
Reviewer: Nick Toste from Roseville, CA  
Straight forward and clear. Top quality. Good addition to any top end job

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Just what I needed November 25, 2013
Reviewer: adam giles from connersville, IN United States  
Shop where I was getting my head redone informed me that my current valve springs had low spring pressure and that I would need new ones. Ordered these and had them shipped to the machine shop direct. they came with detailed information on set up height etc and desired seat pressure. Great product. I have ordered quite a bit from LCE over the years and have always been happy with the products.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
20r street valve springs September 24, 2013
Reviewer: Bryan Sumpter from Spencerville, IN United States  
good addition to 20r head on mild 22r

Was this review helpful to you?


Browse for more products in the same category as this item:

ENGINE > TOP END > Valve Train Components > Valve Springs