ReadyLIFT Leveling Kit
ReadyLift leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed! The ReadyLift 2044000 SST Strut Extensions provide 2.0" of lift which gives clearance to add up to 32" tires to the 1995.5-2004 6-lug Toyota Tacoma trucks.
Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift can be installed one to two hours and costs less than the price of a single custom wheel. Kit includes differential drop spacers and skid plate spacers. ReadyLift Lifetime Warranty Included! All ReadyLift products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
NOTE: It is ReadyLift's position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0" difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0" of rake compared to a Non-TRD truck. Measurements on some customer’s trucks have revealed as much as 1.0" difference in the factory front end height.
If you measure the truck at stock height, then install a 3" strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that have less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0"
2044000 rear block kits to achieve a slight rake to a level stance.
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Toughest finish – Guaranteed
- The safest way to level lift - Guaranteed
ReadyLift Top Mount Strut Extension
- Safely installs without compressing struts
- Fixed Lift
- 10.9 rated mounting studs
- Powder-coated - Solid steel construction
- Made from 7mm plate steel (over 1/4" thick)
NOTES: 33" Tires will only work using an aftermarket wheel. Some applications may require 1" rear block kit, see Part #: 2044000.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.