ReadyLIFT Tundra (2007-2013) 2WD & 4WD SST Lift Kit (Non-TRD) (+3.0" Front & +1.0" Rear)
ReadyLIFT Suspension Inc. has used proven technological engineering methods to
produce a true 3-inch SST Suspension Lift System for the 2007-2013
Toyota Tundra trucks. The 3-inch intermediate Smart Strut
Technology system fits all
2007-2013 Toyota Tundras (Crew Max, Double Cab, Standard Cab), including
both 2WD and 4WD models. This kit provides the owner with the
opportunity to upgrade to larger wheel and tire combinations up to
35-inches in diameter while retaining the great stock ride and handling
is a complete suspension lift kit that includes a powder coated steel
strut extension, front differential drop spacers, skid plate spacers and
1-inch rear lift block. The SST strut extension and diff drop bracket
has been designed to provide 3-inches of front suspension lift while
retaining the OEM safe suspension geometry. Unlike other kits, the
ReadyLift 3-inch suspension system requires no cutting or strut spring
pre-loading and installs quickly and safely using the provided
heavy-duty hardware. Quality step-by-step instructions are provided with
The New 2044017 SST Lift Kit for the Toyota Tundra
will get rid of that "stink bug" stance while retaining your factory
ride. Toyota pickups are built around quality and ReadyLIFT has designed
this 3-&-1 lift system to retain the quality ride and handling that
you expect from a Toyota product.
It is ReadyLIFT's position that our objective is to provide a product
that levels the vehicle. Through on-going research we have discovered
that Toyota trucks have a unique pattern of being manufactured and sold
with varying degrees of rear to front rake. It appears that many Toyota
trucks are not the same height or possess the same rake as the same
stock truck sitting next to it. Our research has determined there can be
as much as 1.0" difference in rake and ride height from truck to truck.
TRD-equipped trucks often have less rake compared to a non-TRD truck.
Measurements on some customer’s trucks have revealed as much as 1.0"
difference in the factory front end. To compensate for the rake
difference on TRD trucks, we recommend using ReadyLift 2.4" Front Leveling Kit and ReadyLift 1.0" rear block Kit for a stance that is closer to level.
*Note: 2013-UP Tundra TRD & Rock Warrior models require purchase of Sway Bar Frame Mount Spacers
ReadyLIFT 2044017 Features
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Toughest finish – Guaranteed
- Safest way to lift - Guaranteed
- Precison crafted upper strut extensions designed to position the strut in the same mounting angle position.
includes differential drop brackets which lowers the differential on
4WD models. This keeps the near factory CV angle specifications that
Toyota built into these great trucks.
- Skid Plate Spacers provided to adjust the skid plate down when using differential drop brackets.
- E-coated finish on the strut extensions, rear blocks and u-bolts will last as long as your Toyota.
rear blocks are designed FOR the Toyota Tundra. These are not universal
blocks. These are OEM-equivalent cast iron rear blocks just like the
factory would make.
installation time is estimated at two to three hours. An alignment
will be necessary upon completion of installing the kit. Like all other
ReadyLIFT kits, the 2007-2012 Tundra lift kit is guaranteed for life
against manufacturing defects.
wheel and tire sizes used for this vehicle include the stock rims
(17x8, 6.5" backspacing) with 33" tires, 20x8.5 rims with 285/65/20
tires. 35" tires will fit with minor modifications to the skid plate.
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.