OEM

Street Valve Shim (Stock Bucket / 2.80mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 2.85mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 2.95mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.00mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.05mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.10mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.15mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.20mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.25mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

Street Valve Shim (Stock Bucket / 3.30mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On...

TRD Bypass Valve (Black Body) Replacement supercharger bypass valve used on the 3.4-liter 5vz engines as well as the 4.0-liter 1GR engines. TRD supercharger kits using the Magnuson blower unit...

OEM Upper Ball Joint Sankei 555 When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest. This is the same ball...

Timing Belt Adjuster (Hydraulic) This is a new OEM pressurized timing belt tensioner for the 5VZ V6. It is recommended to replace both the Belt Tensioner and timing belt together. OEM Toyota...

Tensioner Spring (Timing Belt) LC Engineering has the hard to find parts that are left out of most kits. This is the timing belt tensioner spring found on the 1988-1995 3VZ V6 Engines. OEM Part...

OEM Timing Chain Cover This is a brand new OEM timing chain cover for 3RZ engines. OEM Toyota Part #: 11301-75021 Contact our Tech Support Line for further information at 928-575-2174...

Toyota Seal Packing 103 (FIPG) Toyota OEM specified for oil pan and camshaft housing, guaranteed not to leak. OEM Toyota Part #: 00295-00103 Recommended On: Valve covers Oil pans Intake...

Transfer Case Shifter Boot (OEM) It's common for the factory transfer case boot to degrade over time, crumble and disintegrate. This often results in dirt and mud getting into the transfer case...

Brake Caliper Hard Line (Left Side) This is the OEM hard line that goes from the caliper to the spindle. Tundra 2000-2006 / Sequoia 2002-2007 OEM Toyota Part #: 47318-0C020 Contact our Tech...

Brake Caliper Hard Line (Right Side) This is the OEM hard line that goes from the caliper to the spindle. Tundra 2000-2006 / Sequoia 2002-2007 OEM Toyota Part #: 47315-0C020 Contact our...

Brake Line Bracket (Left Side) This is the bracket that holds the brake line to the spindle. OEM Toyota Part #: 47352-35310 Contact our Tech Support Line for further information at...