Trail-Gear

Disc Parking Brake (Transfer Case Mounted 4Cyl Manual Trans ONLY) With all of the axle upgrades and rear disk brake conversions that are popular on 4x4's, Sometimes the parking brake mechanism is...

Transfer Case Shift Base If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not...

Transfer Case Shifter Kit Stock replacement shifter handle and base. Bolts in using stock bolts. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech...

Transfer Case Shifter w/ Knob If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not...

Trunnion Bearing Eliminator Kit Anyone who wheels hard, rock crawls, or rock races has experienced blown up trunnion bearings, no matter what size bearings they are using, the bearing is always the...

Creepy Twin T-Case Shifter (Forward Shift) Twin stick shifters allow independent control of the high/low and 2wd/4wd sections of your Toyota gear driven transfer case. This allows access to low...

Creepy Twin T-Case Shifter (Top Shift) Twin stick shifters allow independent control of the high/low and 2wd/4wd sections of your Toyota gear driven transfer case. This allows access to low range...

Stick Shift Boot (Twin T-case) This boot is designed to work with our Creepy Twin T-Case shifter (above). It features a flexible rubber shell with a steel bottom plate for mounting to your floor...

Unit Hub (Dana 60 / 9" Housing) These unit hubs are not just another aftermarket 1-ton unit hub that has been machined down and modified from an 8 lug to a 6 lug application. This hub has been...

Upper Gusset (Solid Front Axle) This gusset welds on top of your Toyota front solid axle and helps prevent bending of the axle housing. This product should not be used in a manner that violates...

Vented Non-Cross Drilled Rotor Toyota Pick-Ups and 4Runners (86+) feature larger vented rotors from the factory. Earlier (79-85) trucks used solid, non-vented rotors up front along with smaller...

Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The...

Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole...

Weld-In Frame Gusset (Web) Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel. NOTE: Sold Individually. Contact our Tech Support Line for further information at...

Weld-In Frame Gusset (3 Hole Triangle) Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel. NOTE: Sold Individually. Contact our Tech Support Line for further...

Weld-In Frame Gusset (5 Hole Triangle) Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel. NOTE: Sold Individually. Contact our Tech Support Line for further...

Weld-On Attachment Point (Coped) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is flat on the bottom so that it can be welded...

Weld-On Attachment Point (Flat) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded...

Differential Armor (Weld On) Protect your differential gears from unnecessary damage. Trail-Gear now offers weld on differential Armor for 1995-2004 Toyota Tacoma, and 2000-2013 Toyota Tundra...

Light Bar Kit (Weld-On) Our Weld-On Light Bar Kit is precision CNC bent from 1 3/4" x .120" wall, 1035 DOM tubing. The Trail-Gear Weld-On Light Bar makes a great addition to our stingerless...