Trail-Gear

Extra-Flex Extended Rear Leaf Springs (5″ Lift) Trail-Gear leaf springs are flexible on the trail yet hold their lift year after year. Springs are pre cycled and lot tested to maintain quality...

Front Leaf Spring Hanger Kit (Extra-Flex Springs) Hanger kit allows of hanging of leaf springs on 1986-1995 Toyota Pick-Ups and 4Runners. Kit designed to work with many 3" - 6" lift aftermarket...

Billet Aluminum Fairlead (w/ 10" Center) Polished aluminum hawse fairlead. Designed for use with synthetic winch rope. Mounting holes are 10" on center for standard 3/8" bolts, compatible with most...

1/4" Pipe to #6 JIC If you have an IFS steering box and want to tap your own box, this is the fitting you need to do it. This fitting has a male 1/4" pipe fitting on one end and male #6 JIC fitting...

90 Degree Elbow JIC Need some basic parts for your hydraulic ram steering? With hydraulic hose, high quality crimped connections and JIC 6 ends, these steering components will last. Optional...

Welded Rock Sliders These heavy duty Rock Sliders are fully welded and ready to bolt on to your new Cruiser using the factory mounting holes. Sliders are made from 1 3/4" X .120" wall 1035 DOM...

HD Steering Kit Bigger tires and a lifted suspension are necessities for off-roading today. Unfortunately, they cause feedback through the stock steering set-up. Trail-Gear has solved that problem...

HD Tie Rod Kit Stock steering on FJ80's just can’t keep up with today's off-roading. The stock Tie Rod is easily bent, causing problems on the trails. Don't get stuck on the trail! Upgrade...

Knuckle Rebuild Kit (w/ Wheel Bearings) Our FJ80 knuckle rebuild kit contains all of the replacement parts you need to service your steering knuckles including gaskets, felts, seals, spindle nut &...

Winch Mount Made from 1/4" CNC formed steel plate with mounting holes drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches. For larger winches some...

Flange Dust Shield Dust shield for use with our triple drilled flange, see Part #: 2053174. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech...

Flip Socket (19mm / 21mm) For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard...

Four Link Rear Suspension Kit (OEM Housing) Four link your rig the easy way with the Trail-Link +Four kit. Innovative design allows for quick and easy installation. Crossmember fits between frame...

Four Link Rear Suspension Kit (Rock Assault Housing) Four link your rig the easy way with the Trail-Link +Four kit. Innovative design allows for quick and easy installation. Crossmember fits...

Front 3-Link Kit (w/ 14″ Fox Air Shocks) The Trail-Link Three Front 3-Link Kit is the only complete kit for Toyotas on the market today. This kit is affordable, user friendly, and strong. The link...

Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap...

Panhard Link Tubing (Front 3-Link) This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends...

Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be...

54mm Axle Socket (Front Axle) Our 54mm sockets are designed for servicing Toyota front axle wheel bearings. NOTE: These sockets are 3/8" drive. Contact our Tech Support Line for further...