-
OEM PCV Valve (Steel) A Factory replacement OEM PCV valve with steel design straight up outlet. Use this PCV to replace the stock one that has the molded rubber hose. Don't forget the new PCV grommet, see Part #: 1024084 or the new hose from Toyota...$8.70 -
OEM Main Bolt (Cam Bolt) This is a brand new OEM Toyota main bolt. Ironically this is the same bolt used to hold the cam gear and distributor drive gear onto the front of the cam. Quantity 10 used for crank main caps.OEM Part #:...$7.77 -
Water Pump Gasket Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs with...$7.52 -
T-Bolt Hose Clamp (You Choose Size) Our T-Bolt clamps are all 100% Stainless Steel to stand up to all weather conditions to protect against corrosion. Each clamp has rounded smooth band edges to prevent cutting into you silicone hoses. Engineered and...$7.16 -
PCV Valve (Plastic) This replacement plastic PCV valve is perfect for those that are running aftermarket carburetors such as the Weber 32/36 or 38. The 90 degree PCV makes for a better transition when plumbing your manifold on these applications...$6.29 -
O-Ring (Oil Pump) The oil pump O-ring seals and mates the surfaces to keep oil in its respective place. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. Contact our Tech Support Line for...$5.21 -
LC Engineering Valve Cover Decal Decals increase horsepower! Not really, but this decal has fooled a lot of people that its an LC Engineering engine. Made for long life in the engine compartment this decal is laminated to keep it looking new for years...$5.15 -
1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...$4.65 -
Crankshaft Key Set (Woodruff Key) Crankshaft keys (also called Woodruff Keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...$4.12 -
Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...$4.08 -
OEM Locator Ring Dowel (Rocker Arm Assembly) Dowel pins and Ring dowel pins play a very important part in an engine build. If not utilized, they can lead to devastating problems with endless headaches. The tolerances on these pins are measured in...$3.83 -
OEM Bellhousing to Block Alignment Pin (1978-2016 4Runner/Celica/FJ Cruiser/Pickup) OEM Bellhousing to Block Alignment Pin. OEM Toyota Part #: 90250-10113 Contact our Tech Support Line for further information at 928-575-2174. Note:...$3.22
-
fast shipping
Speed Delivery