-
Water Bypass Hose LC Engineering is now offering an OEM water bypass hose. OEM Toyota Part #: 16261-35030 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...$25.56 -
Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing, includes rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note:...$25.56 -
Intake Manifold Gaskets LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs! This kit contains the...$25.33 -
Liquid Filled Mechanical 0-100 PSI Oil or Fuel Pressure Gauge 1.5” Liquid filled gauge designed to be robust, durable and easy to read. Starting with an all black case, Black Bezel, Black background and using crisp white lettering and bright Red...$25.00 -
Flip Socket (19mm / 21mm) For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard sockets. Especially handy for custom wheels with tight...$24.99 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Aluminized Heat Sheath (1.25" x 3') This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks. This product should not be used in a manner that violates Federal EPA...$24.82 -
Micro Activation Switch & Bracket This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as either the primary method of activating a Nitrous...$24.57 -
Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...$24.41 -
Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...$24.22 -
Piston Ring Installation Pliers This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save time and money. Contact our Tech Support Line for...$23.94 -
Air Injection Block Plate Kit This plate kit will block off the holes on top of the exhaust manifold or header. Kit Includes: (2) Stainless Steel plates (2) Gaskets NOTE: Not for use on smog checked vehicles, fits LC Headers or header flanges...$23.50
-
fast shipping
Speed Delivery