Complete 22R and 22R-E long blocks, stroker short blocks, supercharger and turbo kits for the third-generation Celica — built in-house by LC Engineering since 1985.
Underdrive Belt
(Pro 7" Kit)
This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley with alternator assembly.
Contact our Tech Support Line for...
Oxygen Sensor Install Kit
(2-Bolt Style)
This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you...
2-Bolt Flange
(2 1/4")
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust...
2-Bolt Flange
(You Choose Size)
2 1/4" Flanges:
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8"...
Thermostat
(160 Degree)
There is really only one reason to run this thermostat. Race tracks that require vehicles to run water, no coolant, this is the thermostat you need. We would not recommend...
Oil Pan Mounting Hardware Kit
This complete oil pan hardware kit includes all the high-quality bolts and washers needed to properly install both your oil pan and the oil pickup tube.
Â
Important...
Oil Pan Hardware Kit
(Silicone Seal)
This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with...
Temperature Gauge Sender
This temperature sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we...
Rubber Tailpipe Hanger
(3-Hole)
Factory 3 Hole replacement rubber insulator for tailpipe.
Contact our Tech Support Line for further information at 928-575-2174.
High-Pressure Radiator CapÂ
The LC Engineering Large Radiator Cap is a critical component for maintaining the correct pressure in your Toyota’s cooling system. Measuring 2-1/4" (57mm) in diameter,...
Glowshift Single Gauge Console Dashboard Pod
GlowShift's Universal Single Gauge Console Dash Pod is a single gauge pod designed to mount on your vehicle's dashboard and will house (1) 2 1/16"...
Injector Harness Adapter
(Denso to Bosch EV1)
This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the...
The third-gen Celica ran the 22R from 1982 and the fuel-injected 22R-E from 1983. That is the engine LC Engineering was founded on, and it means our catalog for this car is as deep as it is for any Toyota truck — with the advantage that a Celica weighs several hundred pounds less than the Pickup the same engine came in.
Complete Long Blocks
We build these as finished, ready-to-install engines rather than parts you assemble. Everything is machined, assembled and checked in our own shop:
Be honest with yourself about the stage. A Stage 3 in a street Celica needs the carburetion or injection sorted to match, and a Stage 5 is not a pleasant road engine. Most owners are better served by Stage 2 with the rest of the car brought up to it.
Related: the 1978-1981 Celica catalog covers the carbureted 20R and 22R. Not sure which long block suits your car and your budget? Talk to us first — we would rather build you the right engine than the biggest one.