IFS Steering Box
(New)
High quality new IFS boxes for your crossover steering. We carry both newer and older styles. For crossover steering on (1979-1985) trucks we recommend the early style box, but you can also use the late style if you wish. Late style box fits (1989-1995) Pickup and (1990-1995) 4Runners. All boxes are completely rebuilt with new seals and bearings and each unit is tested for quality and performance before shipping.
NOTE: If you're installing crossover steering, you're going to need to mount an IFS steering box, see Part #: 2060013. Frame mount kit includes both inner and outer frame reinforcement plates, grade 8 bolts, DOM tubing, and crimp nuts. With a heavy duty design and angled leading and trailing edges it helps prevent frame cracking. Inner plate is 1/4", outer plate is 3/16".
This product should not be used in a manner that violates Federal EPA Laws.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1989-1995 Pickup (4x4)
- 1989-1995 4Runner (4x4)
Before Bleeding - Check and Correct as Needed:
- Inspect steering system
- Hoses must not touch any other part of the vehicle
- Steering system noise could be caused by hose touching frame, body or engine
- All hose connections must be tight
- Loose connections might not leak but could allow air into the system
How To Bleed:
- 1. Switch ignition off.
- 2. Raise front wheels off the ground and secure vehicle with jack stands.
- 3. Turn steering wheel full left.
- 4. Fill fluid reservoir to "FULL COLD" level, leave cap off.
- 5. Turn steering wheel lock-to-lock at least 20 times. On systems with long lines or ram assist cycle steering at least 40 times.
- 6. Trapped air may cause fluid to overflow - keep fluid level at "FULL COLD".
- 7. Start engine and maintain fluid level at "FULL COLD".
- 8. Reinstall Fluid Cap.
- 9. Keep Engine Running for 2 minutes.
- 10. Return wheels to center and lower wheels to ground.
- 11. Turn wheel with engine running.
Verify the Following:
- Smooth power assist
- Noiseless operation
- Proper fluid level
- No system leaks
- Proper fluid condition (no bubbles, foam or discoloration)
