Thermostat Housing Adapter Kit (Late style Water Neck) Most aftermarket intake manifolds on the market today use the early style water neck also known as thermostat housing. This particular style of water neck is no longer available from Toyota. LC...

Green Electric Fan Switch (Illuminated) Flex-a-lite auxiliary illuminated single throw rocker switch provides cockpit control or override of fan function. This switch may be wired to actuate a fan, regardless of temperature settings, and you also can...

OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...

1 3/4" Radiator Cap (Small) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the small one that...

2 1/4" Radiator Cap (Large) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the large one that...

Thermostat (190 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...

Thermostat (180 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of the engine temperature allows an engine to operate at its peak efficiency, no...

Thermostat (160 Degree) There is really only one reason to run this thermostat. Race tracks that require vehicles to run water, no coolant, this is the thermostat you need. We would not recommend this for any vehicle running coolant. See our 180°...

Thermostat Housing Gasket (Round Rubber) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a round rubber O-ring gasket that offers the best possible seal for your thermostat...

OEM Coolant Bypass Hose Clamp If you have ever had to connect the lines on the bottom of your throttle body, you know the foresight needed to get everything lined up properly to fit your long nose pliers in for the final step. Well, we here at LC have...

Thermostat Housing Gasket (Paper / Flat) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a paper gasket that offers an excellent seal for your thermostat housing...

T-stat Housing Adapter O-Ring (Offenhauser Manifolds) If you are running an Offenhauser intake manifold you are most likely using our thermostat housing adapter with a late style water neck. The adapter has its own O-ring (other than the one around the...