- 
            
        
    
-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...$14.03 - 
            
        Fuel Injector Isolators (Bottom) To isolate injectors in the stock intake manifold LC Engineering suggests changing these when rebuilding the engine or when servicing the fuel injectors. LC Engineering flow-matched fuel injectors include new isolators...$12.80 - 
            
        
    
Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...$12.36 - 
            
        K&N Air Filter Cleaner (99-0606) K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. The 99-0606 Air Filter Cleaner will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to...$11.34 - 
            
        K&N Air Filter Oil (99-0533) K&N 99-0533 is an 8 ounce squeeze bottle of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air...$11.34 - 
            
        Fuel Injector Top Grommets This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets. NOTE: Sold as a set of (4). Contact our Tech Support Line for...$8.52 - 
            
        Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate...$8.20 - 
            
        
    
Idle Air Compensator Valve O-Ring This is the OEM rubber o ring gasket that is used on the 1989 to 1995 Toyota 22RE throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...$7.86 - 
            
        ORB -06 Plug Fitting (Each) Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any...$4.55 - 
            
        
    
ORB -06 To AN -06 Male Fitting Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any...$4.24 - 
            
        Throttle Body Gasket Throttle body gaskets can be a source of more issues then they are often given credit for. Anytime you remove your throttle body it is best to replace the gasket because tiny imperfections you may not see can cause vacuum leaks...$3.09 - 
            
        Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...$2.09 
- 
                                    
fast shipping
Speed Delivery