Injectors

Fuel Injector Service (Ultrasonic Cleaned & Serviced Using Customer Supplied Cores) NOTE: Customer is responsible for paying postage to send their injectors to LC Engineering. Be sure to include the following with your injectors: Name (First &...

Cold Start Injector Service Is your classic Toyota having trouble firing up on crisp mornings? Over time, varnish, carbon buildup, and debris can clog your cold start injector, ruining its spray pattern or stopping fuel flow entirely. Our professional...

Fuel Injector Rebuild Kit LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. Don't forget the cap end which is sold separately, there are two different styles depending on your year so make sure to...

Fuel Injector Isolators (Bottom) To isolate injectors in the stock intake manifold LC Engineering suggests changing these when rebuilding the engine or when servicing the fuel injectors. LC Engineering flow-matched fuel injectors include new isolators...

Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...

Fuel Injector Top Grommets This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets. NOTE: Sold as a set of (4). Contact our Tech Support Line for...

Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...