Performance and replacement parts for the 1989-1995 Toyota Pickup, the last "mini-truck" generation Toyota built for the U.S. market. 22RE four-cylinder and 3VZE V6 long blocks, stroker kits, performance components, and OEM-spec replacements from LCE.
Flip Socket
(19mm / 21mm)
For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard...
Weld-On Attachment Point
(Flat)
Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded...
Weld-On Attachment Point
(Coped)
Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is flat on the bottom so that it can be welded...
Garrett T3 Exhaust Discharge Flange
(4-Bolt)
Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5"...
Aluminized Heat Sheath
(1.25" x 3')
This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks.
This product...
Micro Activation Switch & Bracket
This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as...
 LCE Project 85' Sunset T-Shirt
Â
Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Â
Â
Â
Contact our Tech Support Line for further information at...
LCE '85 Road Trip T-Shirt
Show your support at the race track or out on the rocks with the official LC Engineering '85 Road Trip T-Shirt! Featuring a premium custom graphic celebrating the ultimate...
LCE '85 Truck Grille T-Shirt
Show your support at the race track or out on the rocks with the official LC Engineering '85 Truck Grille T-Shirt! Featuring a clean graphic of the iconic vintage Toyota...
Oil DipstickÂ
This is a premium replacement of oil dipstick for the 1995.5-2004 Toyota 2RZ-FE (2.4L) and 3RZ-FE (2.7L) 4-cylinder engines. Perfect for replacing bent, broken, or missing factory...
Header Stud Set
Replacing your Turbo manifold? It is a good idea to replace your studs too! LC Engineering offers nothing but the best quality components around. The factory exhaust manifold studs...
Piston Ring Installation Pliers
This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save...
The fifth-generation Toyota Pickup (1989–1995) is the last "mini-truck" generation Toyota built for the U.S. market before the 1995.5 Tacoma transition. It is also the largest active-driver platform in the Toyota Pickup lineup — many of these trucks are still on the road as daily drivers, and the 22RE four-cylinder engine that powered most of them has earned its reputation as one of the most reliable production four-cylinders ever built. The 3.0-liter 3VZE V6 was offered as an upgrade engine from 1988 forward, giving 5th-gen owners a V6 option for the first time.
LC Engineering supports 5th-gen Pickup owners with performance and replacement parts across both engine families. For 22RE trucks, our catalog covers long blocks, the LCE Stroker (2.7-liter displacement increase), Stage 2 through Stage 5 camshafts, supercharger and turbo kits, header kits, master rebuild kits, and OEM-spec replacement components. For 3VZE V6 trucks, we offer long blocks, rebuild kits, and the supporting components that keep the V6 platform running.
Browse 5th-gen Pickup parts above by system, or use these starting points: