Front Bumpers

Two Trail-Gear Rock Defense front bumpers, both built entirely from 1.75" x .120" wall DOM tubing with Trail-Gear's winch mounting plate and a front 2" receiver. Mounting holes are drilled for most 5000 to 9500 lb low profile winches. Both are listed for 6 lug 4WD trucks, need a hawse fairlead rather than a roller, and are not intended for use with a body lift.

Trail-Gear's All-Pro Series tube bumper is the low profile option for trucks on 35" or larger tires. It is mandrel bent from 1.75" x .120" wall tubing, carries a 3/16" winch plate on the standard 4.5" x 10" pattern for most winches up to about 10,000 lb, bolts to the factory frame mounts and is made in the USA.

Rear Bumpers

Three directions here, depending on how the truck gets used:

  • Trail-Gear Rock Defense Rear Bumper: engineered for the 6 lug 4WD Pickup, built from 1035 DOM tubing with a 2" receiver, and tucked tight to the frame so it does not drag coming off ledges.
  • LC Engineering Tube Rear Bumper: made by LCE from 3" OD, .120 wall tubing, with safety chain loops and a receiver for bike racks, cargo carriers and recovery gear. It ships raw for paint, powder coat or bedliner, and it is built for protection and light utility rather than towing highway trailers.
  • Fey Surestep and Diamondstep bumpers: the classic embossed diamond tread step bumper in chrome or black, V5 tested and certified for towing. They mount with the 1989 to 1994 rear step bumper mounting kit, sold separately.

Rock Sliders and Tube Doors

Trail-Gear rock sliders are 1 3/4" OD x .120 wall 1035 DOM tubing, strong enough to take a high lift jack anywhere along their length. Pick the length by cab: the 78" pair for the Xtra Cab or the 58" pair for the short bed. The weld on mounting kits come as an 8 leg kit for the 78" sliders and a 6 leg kit for the 58" and 67" sliders.

The Rock Defense Tube Doors replace the stock doors on 1989 to 1995 4WD pickups. They are 1 3/4" x .120 wall 1035 DOM, sold as a pair with slam latches and adjustable door stops, and ship raw for paint.

Building Your Own Front Bumper

For fabricators, the Trail-Gear Heavy-Duty Winch Mount plate for the 1989 to 1995 Pickup and 1990 to 1995 4Runner is 1/4" steel, CNC laser cut and bent, bolts to the factory frame holes and has a 2" receiver built in. Weld on attachment points and 3" frame gussets in 3/16" plate finish the job.

Not sure which bumper fits your truck? Tell us the year, cab, drivetrain, tire size and whether a winch is going on, and our tech team will point you at the right one. More for this truck under winches, suspension and the full 1989 to 1995 Pickup catalog. 4Runner owners have their own 1990 to 1995 4Runner bumpers and sliders page.