Odds and Ends

Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used...

Upper Link Mount (OEM / Rock Assault) Trail-Gear customers tend to drive where the majority would never ventureâ€"climbing over rocks, hills, and rugged off-road terrain. Hobbies like that...

LCE Heavy-Duty Rear U-Bolt Flip Kit First seen and torture-tested on our iconic Project '85 rock crawler build, the LC Engineering Rear U-Bolt Flip Kit is now available for your own rig! Engineered...

Front 3-Link Lower Link Frame Bracket (You Choose Side) Individual Trail-Link Three™ Front 3-Link parts. Contact our Tech Support Line for further information at 928-575-2174.

Creeper Joint Shackle Mounts (You Choose Size) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces...

Upper Front Tower Shock Mount Kit (Low Range Off-Road) Need to mount up shocks but don't like the typical "tube style" shock hoops? These shock towers are a great alternative and offer a few added...

Front Leaf Spring Hanger  The LC Engineering Front Leaf Spring Hanger provides a heavy-duty, precise front mounting location engineered specifically for 47" front leaf spring conversions. Included in...

Rear Shackle Mounts If you're installing longer rear springs you may need to relocate your rear shackle mount. You can do this by cutting off the original units with a die grinder and then welding...

18mm Shackle Mount (Pair) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and...

Air Shock Hoop Mounting Kit Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement...

Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are...

Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and...