Injectors

Equalized and Flow-Matched Injector Set (22RE / 750CC)   These "Direct Fit" equalized and flow-matched fuel injectors are just what the motor ordered! No adapters, clips, pigtails or any messing around with electrical connections. Rest assured...

Fuel Injector Service (Ultrasonic Cleaned & Serviced Using Customer Supplied Cores) NOTE: Customer is responsible for paying postage to send their injectors to LC Engineering. Be sure to include the following with your injectors: Name (First &...

Fuel Injector Cup Set When performing a top-end rebuild, servicing your intake manifold, or upgrading your fuel system, don't risk performance-robbing vacuum leaks by reusing worn factory hardware. These fuel injector cups press directly into the intake...

Cold Start Injector Service NOTE: Customer is responsible for paying postage to send their cold start injector to LC Engineering. Be sure to include the following with your injectors: Name (First & Last) Return Shipping Address Sales Order...

Fuel injector Cup & O-Ring Set | Single Cylinder When performing minor repairs, servicing a single cylinder, or replacing damaged hardware during a top end tear down, don't risk performance-robbing vacuum leaks by reusing worn factory seals. This...

Fuel Injector Rebuild Kit Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include all new parts in the...

Fuel Injector Caps (Green Cap) These clear injector caps fit 3VZ V6 injectors. For installation, we recommend placing the caps in hot water then pushing them on to the injector. NOTE: Sold as a set of (6). Contact our Tech Support Line for...

Fuel Injector Rebuild Kit LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. Don't forget the cap end which is sold separately, there are two different styles depending on your year so make sure to...

Fuel Injector Cup Set  When rebuilding your cylinder head or servicing your fuel system, don't risk a performance-robbing vacuum leak by reusing worn-out factory hardware. These fuel injector cups sit directly in the intake manifold to provide a...

Fuel Injector Caps These black injector caps fit Type C & Turbo model injectors only. For installation, we recommend placing the caps in hot water then pushing them on to the injector. NOTE: Sold as a set of (4). For Type E or F caps, see Part #:...

Fuel Injector Isolators (Bottom) To isolate injectors in the stock intake manifold LC Engineering suggests changing these when rebuilding the engine or when servicing the fuel injectors. LC Engineering flow-matched fuel injectors include new isolators...

Injector Connector So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or effective. This injector connector is just what you need. It...