Steering Box Fitting (High Pressure) This special fitting is used to connect the high pressure steering hose to the steering box. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

Power Steering Pump Pulley (V-Belt) This pulley is designed to fit our standard or full hydraulic power steering pumps. NOTE: Not designed for the stock pump. This product should not be used in a manner that violates Federal EPA Laws. Contact...

Power Steering Reservoir When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock pump but is not adequate for...

Power Steering Reservoir Bracket This Rock Assault Reservoir Bracket bolts right to the back of our Rock Assault Reservoir and allows you to either weld the other side of the bracket to your cage (coped for 1 1/2" tubing) or simply butt weld it to a...

Reservoir Filter Bracket Our Rock Assault Reservoir Filter Bracket bolts right to the back of our Rock Assault Reservoir Filter Kit (into the pre-tapped holes) and allows you to either weld the other side of the bracket to your cage (coped for 1 1/2"...

Steering Rod Bungs (Weld In) Finally a weld in bung with the thread pitch of an FJ80 Tie Rod Ends, which is the most commonly used Tie Rod Ends in Toyota hi-steer kits. Once welded into your tie rod or drag link, this bung will allow you to make a...

IFS Steering Box Fitting (Low Pressure) This is a Trail Gear low pressure IFS steering box fitting. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174...

Ram Clamp (w/ Weldable Mount) These mounts are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig. The clamps have a 2.5″ ID and the Weld-On Mount is made out of 1020 billet steel. These Weld-On Ram Mounts are...

Power Steering Fluid Cooler If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing an oil cooler in front of the...

Power Flow 1650Psi Power Steering Pump (w/o Pulley) Trail-Gear’s new Power Flow 1650 psi pump has been designed and engineered to provide ultimate performance. The body of the pump is constructed of steel to increase reliability and decrease...

Power Steering Pump Bracket This power steering pump brackets is designed for the TC style power steering pumps and include all applicable hardware. NOTE: This is for the Trail Gear pumps not for stock applications. Parts shipped raw, and ready to...

Power Steering Reservoir Bracket (Trail Gear) This Reservoir Bracket makes it easy to bolt in the reservoir on most 4cyl 4X4 Toyota applications from 1979 - 1995. Includes mounting hardware. NOTE: Does not include reservoir. Unpainted finish...